3734 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸ヒ《〈 문의 OIO↗5793↗7458 》〉㎛beforehandム셔츠룸후기셔츠룸후기╇pen 선릉셔츠룸셔츠룸가격 셔츠룸‰강남셔츠룸㉦nestㅳ"

Open Indirect Ophthalmoscope
Instructions from Open Indirect Ophthalmoscope
The step by step build instructions for "OIO" can be found here: http://www.instructables.com/id/Open-Indirect-Ophthalmoscope-OIO/

Hardware
Instructions from CNC pen plotter
The assembly process is quite straightforward: Assembly the pulleys and pulley holders (3 in total).Assembly the pulleys, the motors and the motor holders (3 in total).Assembly the X shafts and the X shaft holders (2 in total).Assembly the movable left...

Wiring the matrix (columns)
Instructions from FPGA Blinker
Now, solder 8 wires between C'x and G"x. Calculate the appropriate current limiting resistors values and have them handy (do the calcs and buy them beforehand). Solder the resistors on the borad and use wires to solder the PMOS drains (D'0, ..., D'7)...

Fix Up Down Arrangement
Instructions from Cute Drawing Robot - Servo and Android
1) Now the stand is ready. We want an arrangement to hold the servos and move up and down in the rail. 2) I use a old pen. Cut the pen in to two pieces and insert into the rods, The pen inner dia is more greater than the rod dia. So i insert a straw...

Step 5: Make the Nozzle
Instructions from Automatic Alcohol Dispenser With Arduino
The nozzle is used from old pen. Fortunately, it is perfect suitable to the pipe, what a lucky! Then install every thing on the case, look lovely, right :) ?

Smooth Ambience System With Voice Command
Instructions from Smooth Ambience System With Voice Command
Step 5: CONNECT YOUR PHILIPS HUE TO YOUR HUBYou can connect Philips Hue light bulbs to your Prota Pi to add some nice light effects to your smooth ambience system.To do so:Go to App Libraries and download the Philips Hue appOpen the Philips Hue app....

PuriBottle
Instructions from PuriBottle
To make the ultrasonic sensor work, you have to read this program and create the circuit that matches with it!Here is the program:/* * created by Rui Santos, http://randomnerdtutorials.com * * Complete Guide for Ultrasonic Sensor HC-SR04 * Ultrasonic...

Testing With Out Pen Up Down
Instructions from Cute Drawing Robot - Servo and Android
1) Now the 2 servos are fitted to the aluminium frame slot and stick with hot glue gun. 2) Join the arms with screws and before fitted fully, want to check and tune the software. 3) So paste the frame to a flat surface facing each other correctly center....

Paint the circuit board black
Instructions from Customized wireless mechanical keyboard
I didn't like the look of the white circuit board behind the keys. It might look great on another build but I thought with the dark walnut case I had planned it wouldn't be a good fit. After looking at a few options, I ended up deciding the easiest...

3. Buying and cutting
Instructions from Saw game
The next step is buying whatever material you need based on the previous steps. You'll also need a bunch of screws, dowellings, a saw, a metal rod with 5-10mm diameter based on the dimensions you chose, a wooden rod long enough to be cut in half and...

Software: Understanding the interface between the uPD7220 and the CPU
Instructions from uPD7220 Retro Graphics Card (and VGA hack)
I am writing this expecting the reader to have a strong knowledge of computer hardware. You have been warned.The uPD7220 occupies two addresses in IO space and has an 8-bit data bus. There are also the WE and RD enables, but there is no chip...

Lasercut train points switch box
Instructions from Lasercut train points switch box
STEP 5 – MAKE DESIGNNow you’ve got the overall dimensions you can produce your mimic. This can be done either by:Laser-cuting using a CAD file – this can be done on plywood or acrylic, the above design is translated to a package such as inkscape and...

Cardware
Instructions from Cardware
First print out the full set of parts on 200-220GSM card stock. If you are using a dark coloured card, print the templates onto 85GSM photocopy paper and glue it to the card.Score all of the dotted lines well with a sharp point and a ruler. A ball-point...

Back Mirror
Instructions from Infinity Mirror Scuba Mask
Place the scuba mask face down on a piece of white paper and trace around the edge with a pencil or pen. Draw a line around the interior of this traced oval such that it is 3/8" away from the traced line ie smaller. Cut out this smaller oval - this is...

Gather your tools and supplies
Instructions from DIY Electronic Yarn Meter
You’ll need: A weighted tape dispenser with 1” core, similar to this one. A full roll of tape A digital magnetic counter kit Cardboard A pen or pencil Scissors or an exacto knife Phillips/Plus-tip screwdriver Pliers Hot glue gun and glueA hand...

1
2
3
4
5
>
>|