58 Results for "Reverse Engineering Blood Glucose Monitors"

Program
Instructions from Home Security
Note: Download the project code here. Workshop 4 – 4Duino Basic Graphics environment is used to program this project. (The same could be implemented in the latest Arduino IDE)This project requires the Arduino IDE to be installed as Workshop...

Let's give it something to talk about, er, to
Instructions from rudRemote
A transmitter that doesn't have a receiver is like a mule with a spinning wheel. Wait, no it's not. It's like a... whatever. It doesn't do a whole lot unless there's a receiver to talk to. So I've whipped up an example robot that takes input from rudRemote...

Field Testing
Instructions from DIY Solar Panel Monitoring System
Now our device is ready for real field testing. The connection shall be as follows: 1. Connect the negative terminal of the load to the negative terminal of the output screw terminal and then the positive terminal to the output positive terminal. Here...

Connecting the ASV Motor Circuit
Instructions from Project Albatross
To connect the bilge pumps to properly to the Pixhawk, we had to implement a circuit including two relays, the two HiLetgo BTS7960 motor drivers, two buffer circuits, and three different power source voltage levels. The resulting circuit is diagrammed...

Apache AL13P & TL-320b - One Pass PCB Toner Xfer
Instructions from Apache AL13P & TL-320b - One Pass PCB Toner Xfer
Building the Add on PCB is simple, just a few parts. You can test your build by applying 12V+ on pin 4 and a ground on pin 3 of the 6pin inline wire to board pads. The Beeper should emit a 1 second beep. Building the CAT5 (15") 6pin cables to attach...

Off-board header pins
Instructions from Over-engineered LED strip controller
All of these are optional. You can skip any or all of them if you don't want to have the feature. All have their components mounted on the bottom side of the main PCB. J3, with label "Reset", is for a reset switch. Use a 2-pin header strip. Since this...

Configure Arduino IDE Tools Menu
Instructions from Fading LED with ATtiny85
Open Arduino IDE, (1)Board: ATtiny25/45/85 (2)Processor: ATtiny85 (3)Clock: Internal 1 MHz (4)Port: COMXX(Arduino Uno) (5)Programmer: Arduino as ISP Upload the below given code: /* Fading LED with ATtiny85 The analogWrite() function uses PWM, so if you...

Building The Board
Instructions from MQTT NOAH Baseboard
Intro: This is the fun part of most things I do, building the PCB. I used Eagle CAD 7.6.0 for my PCB design because hey, I have a license and I know it already. If you have a CAD tool like KiCAD just make sure after importing the files that everything...

SSR Flyback Inductor
Instructions from 350 Watt True Sine Inverter
This instruction is for building the SSR flyback inductor - L201. It describes materials and fabrication guidance but assumes the reader has experience assembling magnetics. Additional information can be found in the 'ssr-flyback' tab of...

BD139/140 Power Transistor Pair
Instructions from Transistor Basics | BD139 & BD140 Power Tutorial
Transistors are available in various types of packages such as 2N series or the Surface mount MMBT series they all have their specific advantages and applications. Out of these, there is another kind of Transistor series the BD series which is a power...

Detailed description of settings
Instructions from DIY MMOS ffb STM32 and servo drive servo motor
If you have any questions, please consult my email: huangjin169@gmail.com YouTube video test drive：https://www.youtube.com/channel/UCKOHWlPf_8TIHPGB0uo6Nrg/featured Motor and drive connection 1 First set up the servo drive. Do not connect...

Build for Cooling
Instructions from Battery Desulfator Kit, TESLA 12V compatible
There's a free license version of Eagle Cad for viewing/printing/exporting gerbers etc. Otherwise in the gallery you'll see a schematic and a layout guide.The FETs and the Snubber Schottky are laid out along the edge of the PCB for direct mounting to...

Connect the power wiring from the existing power supply to the Buildbotics Controller
Instructions from CNC retrofit with a Buildbotics CNC Controller
Power is supplied to the Buildbotics Controller through the 6-pin molex connector on the back. When connecting to this connector, be sure to connect ground to pins to the top row (pins 1, 2, and 3) and the working motor voltage to the bottom row...

I got an un1eet v1 - Now Wat?
Instructions from #un1eet Shitty Add On
So you got your new #un1eet Shitty Add On and you are wondering: Why did I buy a kit? I just want it to blind onlookers. Well, as part of the complete #un1eet experience, you must hack it together yourself with scant instructions. What you...

Build details for mask intercom and exhalation filter
Instructions from A P100 Mask Intercom
At the start of the project, I had 3 identical P100s, all bought before the pandemic. They cost the equivalent of $47 US apiece in Ontario in the fall of 2019. The microphone is a repurposed pair of earbuds. Not only can earbuds convert electrical oscillations...

|<
<
1
2
3
4
>
>|