Close

6761 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • TI-84+ SE Backlight

  • Take off the faceplate, remove all the batteries (especially the backup coin cell), unscrew the case, and pry it open. You're going to need a torx screwdriver for the case screws. Theres also clips holding the case together. Don't be too worried if you...
  • DIY SlingBox $30

  • This is the code I used for the right frame in the first picture.#!/usr/bin/perl#use CGI qw/:standard/;use URI::Escape;my $cols = 3;my %button_codes;$button_codes{'1'}='BTN_1';$button_codes{'2'}='BTN_2';$button_codes{'3'}='BTN_3';$button_codes{'4'}='BTN_4';$button_codes{'5'}='BTN_5';$button_codes{'6'}='BTN_6';$button_codes{'7'}='BTN_7';$button_codes{'8'}='BTN_8';$button_codes{'9'}='BTN_9';$button_codes{'0'}='BTN_0';$button_codes{'Ch-'}='KEY_CHANNELDOWN';$button_codes{'Ch+'}='KEY_CHANNELUP';if...
  • DIY SlingBox $30

  • And this is the left frame. flowplayer href="http://xxx.xxxxxx.org:8080/stream.flv" style="display:block;width:320px;height:240px" id="player"> flowplayer("player", "flowplayer-3.2.11.swf");
  • DIY SlingBox $30

  • Check Server Status:#!/bin/sh##echo "Content-type: text/plain"echo "Content-type: text/html\n"echo ""echo "Check Server"echo ""if ps -C vlc > /dev/nullthen echo "VLC is running"else echo "No server found"fiecho ""echo "Back"echo ""echo ""
  • Wearable computer

  • Take a lens housing. Remove the lens and flip it over, then clip it to the other side of the housing. Put a thin layer of superglue along the edge of the lens housing (on the opposite side from the lens itself) and place it firmly atop the pane, on the...
  • Bench power supply

  • 1) Come up with a simple good idea.2) Add good ideas to it.3) Try to implement it.4) When it fails, start to strip down the design to try to get it to work.5) Strip it down more6) More...7) Rejoyce when something simple works8) Add a few simple things...
  • Ultra Simple 2x4 Server Rack

  • Have them cut the boards for you to these specs:Board #1 and 2: 20.75", then 20.75", then the remainder should be cut in half (will be 27.25" each, minus whatever is converted to sawdust)Board #3 and 4: Just saw these in half: 48" long.This will give...