Close

6761 Results for "《 예약문의 OIO↗8489↗8306》청담가라오케П㈄delightfulセ가라오케가라오케νreflected 가라오케사이즈가라오케 가라오케추천㎙가라오케ｑbring㈀"

  • In Another Life
  • Instructions     from Rubidium 2.0
  • Or else hopefully in this life, if you are not familiar with working with 120 volts, you can always hire an electrician, and also find out if permits are required, just in case you decide to do something really wild like add 120 VAC relays to all of...

  • Arduino-Compatible FPGA Shield
  • Instructions     from Arduino-Compatible FPGA Shield
  • Step 3 - Build major footprints:  Costing the available board area requires building the major footprints and placing them on the PCB.  Built early footprints and placed to determine what additional space is avail.  Files in git.

  • TI-84+ SE Backlight
  • Instructions     from TI-84+ SE Backlight
  • Take off the faceplate, remove all the batteries (especially the backup coin cell), unscrew the case, and pry it open. You're going to need a torx screwdriver for the case screws. Theres also clips holding the case together. Don't be too worried if you...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • This is the code I used for the right frame in the first picture.#!/usr/bin/perl#use CGI qw/:standard/;use URI::Escape;my $cols = 3;my %button_codes;$button_codes{'1'}='BTN_1';$button_codes{'2'}='BTN_2';$button_codes{'3'}='BTN_3';$button_codes{'4'}='BTN_4';$button_codes{'5'}='BTN_5';$button_codes{'6'}='BTN_6';$button_codes{'7'}='BTN_7';$button_codes{'8'}='BTN_8';$button_codes{'9'}='BTN_9';$button_codes{'0'}='BTN_0';$button_codes{'Ch-'}='KEY_CHANNELDOWN';$button_codes{'Ch+'}='KEY_CHANNELUP';if...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • And this is the left frame. flowplayer href="http://xxx.xxxxxx.org:8080/stream.flv" style="display:block;width:320px;height:240px" id="player"> flowplayer("player", "flowplayer-3.2.11.swf");

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • Check Server Status:#!/bin/sh##echo "Content-type: text/plain"echo "Content-type: text/html\n"echo ""echo "Check Server"echo ""if ps -C vlc > /dev/nullthen echo "VLC is running"else echo "No server found"fiecho ""echo "Back"echo ""echo ""

  • Wearable computer
  • Instructions     from Wearable computer
  • Take a lens housing. Remove the lens and flip it over, then clip it to the other side of the housing. Put a thin layer of superglue along the edge of the lens housing (on the opposite side from the lens itself) and place it firmly atop the pane, on the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday