Upload software to the Arduino, and run the Python software on the PC. The Python software requires 4 libraries: serial, keyboard, time and os, you may need to install these first using pip (or conda if using the Anaconda distribution of Python). The...
Connect the Mini RFID Reader/Writer Unit to PORT A of the M5Core2 (the red port near the USB-C connector) using the Grove cable. This unit uses the I2C protocol to send data to the M5Core2.Take out the CORE2 plate on the back to expose the pins.The Finger...
Next, open another window of Arduino IDE, make sure to choose your Ameba development board in the IDE: “Tools” -> “Board”Then open the “Master Writer” example in “File” -> “Examples”...
In this example, we use Ameba as the I2C master writer, and use Arduino as the I2C slave receiver.When the I2C slave receives string sent from I2C master, it prints the received string. Setting up Arduino Uno to be I2C Slave First, select Arduino in...
This proof of concept demonstrates that it's possible to track and log a soccer ball's landing position on a sports rebounder without using a webcam - instead, you can feed the output of several accelerometers into a trained recurrent neural network...
This is the quick hack of another code sample "Register writer" to play a warm up sound. The hardware is based on the schematic linked in the code. Works with Arduino Uno R3 aka: 328 compatible boards. https://pastebin.com/raw/FehmVLQS /*******************************************************************...
Not hardware, but essential with any temperature/humidity sensors, easier to have it here than to find some earlier sketch with DP calculation. Dew point resembles absolute humidity pretty well, air pressure does affect it but causes only like +/- 0.5°...
Besides a special build of PowerStrip (for Windows) available upon request only,some rare EDID-writing code is still archived online but never made it into mainline due to the serious risk of picking the wrong EEPROM:If you wipe the one on a DVIADD card,...
I'm going to be using two USB sticks for the install process: the first is the pfSense installer and the second is the boot drive onto which pfSense will be installed. But before that, you'll need to decompress the image you downloaded. The following...
Let’s get to it! Install Arduino IDE, the esp32 board and the Fixed Libraries. To install the ESP32 board in your Arduino IDE, follow these next instructions: 1) Open the preferences window from the Arduino IDE. Go to File> Preferences 2) Enter https://dl.espressif.com/dl/package_esp32_index.json into...
I used micropython, because I haven't used it for a project yet and I was shocked how well it worked for this. There are many tutorials on how to use Thonny with an ESP32, and I found it to be much quicker than doing this in Arduino/ C++. The main files...
Step 3: Connect to VivaPlanetThis next step is a bit more complex and requires some C# and visual studio with the Gagetter software from GHI Installed. This will take some time...persist it will be worth it in the end...There are a lot of great tutorials...
Step 3 - Build major footprints: Costing the available board area requires building the major footprints and placing them on the PCB. Built early footprints and placed to determine what additional space is avail. Files in git.