Close

10946 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

  • The supports/bearings
  • Instructions     from Projector Screen
  • Drill two holes, almost all the way through, two blocks of something the same size as the outer diameter of your roller blade bearings. It's a common size like 3/4 or 7/8in. Make them identical. For the hole you are after, you need a nut on the threaded...

  • The motor
  • Instructions     from Projector Screen
  • Take your other coupler nut, and fashion a small post coming off of it at a 90 degree angle. I welded mine. Take your corner brace, and make a second post behind the first, the thickness of the corner brace, so the main post slides on the front, and...

  • The control circuit
  • Instructions     from Projector Screen
  • The relay coil is driven by 'remote power' output on the projector. There are no other connections made to the coil. As such, this also performs the needed isolation so if you screw up anything else, you at least don't fry your projector. The projector...

  • Final assembly
  • Instructions     from Projector Screen
  • Put it up on the wall and level it.  One day in the sun will remove any wrinkles, or careful application of a hair dryer will do the same.  Don't overheat it as the plastic inside can expand and ruin it.Tweak the stop positions.  Applying...

  • Smile Station
  • Instructions     from Smile Station
  • On this next link is where I got the info for sending the photos taken with its own email account .http://mitchtech.net/connect-raspberry-pi-to-gmail...I tested it by copying the script to send attachments in to the python editor on the rpi by first...

  • Smile Station
  • Instructions     from Smile Station
  • Well in this step I will focus on the code and getting it to work with Facebook and Flickr ....---------------------------------------------------------------------------------------------------------#!/usr/bin/env python# this file is run using this...

  • Smile Station
  • Instructions     from Smile Station
  • Ok I pored the cement in the tube with a blue foam board on the bottom glued to the sides. That seemed to work out well accept I stuck a blue foam board cutout with a hole cut out in it to keep the 2" pvc pipe in place. Bad Idea it moved the PVC pipe...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • Build the base station using the following simple steps:Disassemble the outlet controller remote and throw away the plastic casingSolder wires between the +5v line on the Arduino and the positive battery terminal on the remote.Do the same with the ground...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • Set up the server to handle IO with the base station by doing the following:Install IIS and the ASP.NET handlers on the server (Yes, I'm a horrible person for not using Node.JS or something like that)Copy the web site files (coming soon) into the C:/inetpub/wwwroot...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • For each machine where you want speech recognition:Run the JarvisListBox app, and set it to run at start-up.If you feel comfortable with code, you can edit its commands in the ListBox constructor to make it more appropriate for your setup.Running microphones...

  • Sci-fi grade Home Automation
  • Instructions     from Sci-fi grade Home Automation
  • For the outlet power detectors:Cut the connectors off of your two wall warts and solder the grounds together (and to the ground on their Arduino)Solder the +5v wire of one wall wart to the +5v plug on the Spark core, and the other to digital input 3...

  • A Measured Snow Shovel Improvment
  • Instructions     from A Measured Snow Shovel Improvment
  • The location of the drill holes turns out to be more critical than I thought. I tried to match the existing holes in the shovel, but apparently I must have slightly flexed either the shovel or ruler while measuring. This caused the end result to be slightly...

  • RF light switch
  • Instructions     from RF light switch
  • Transmitter: 4.5-5V supply must be thrown towards the ATtiny. The RF transmitter works best with 12V, but 4.5V proved to be enough for 35m distance (even with the receiver inside the house).The LED is just for an indication that the button press...

  • RF light switch
  • Instructions     from RF light switch
  • Receiver:This end is connected to mains voltage (240VAC for me). Ignore the photos as that was done on old board with other projects, and still used ATmega's. Line up a 7805 or your favourite regulator and feed the uC and RF module. Grab a data line...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday