10946 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Assembling the HDMI port
Instructions from RETRO 1 - Home Computer Console
Now that we have our power cable ready, we should have the parts in the photo below: Photo: Two 'halves' of the 3D printer holder, VGA to VGA cable, VGA-to-HDMI adapter and mini-USB to header cable. Insert the adapter into one piece of the holder and...

Assembling the PCB Holder
Instructions from RETRO 1 - Home Computer Console
Now get your PicoMiteVGA board and the two 'halves' of the PCB holder, as in the photo below: Starting with the larger piece of the PCB holder, GENTLY AND VERY CAREFULLY align and push the PCB into the shaped-slot. Note any resistance or catching...

Final checks and power on
Instructions from RETRO 1 - Home Computer Console
Double and if necessary, triple check, the cabling and wires, especially the HDMI power connector header plug. is it definitely on the correct end of the PCB connector (see photos) ?is the RED wire definitely going to PIN 40 of the PCB connector?is the...

Finishing touches
Instructions from RETRO 1 - Home Computer Console
Although I didn't bother to sand or fill or paint any of the parts, I did feel they deserved a logo or two.So I used the Microsoft 3D Builder program to load a set of characters that can be found by selecting "Letters and Numbers" in the "3D Library"...

Assemble Pulse Driver Board.
Instructions from Transcranial Magnetic Stimulator
The latest revision uses larger SCRs. Ideally, both SCRs should lay flat on the board, to be affixed by 4-40 screws. Assemble board as shown. (See schematic and parts list.)

Tasmota rules
Instructions from Tasmota as thermostat controller
The first rule does the most actual logic. Variables in use: var1 - the currently set temperaturevar2 - the currently measured temperaturemem1 - "low" temperature setting when "relay 1" off, normally the minimum temperature allowed in the spacemem2 -...

Poor workmanship disclaimer ;^)
Instructions from Z88 Tribute Computer
I know, I know. In the photos of this project there are scratches on the casing, there appears to be a massive hole that looks as though it was cut with a chainsaw, there is glue all over the place, the 3D printed parts look as though they were made...

3D printing settings
Instructions from APEROLiker / HUGOliker - Cocktail Mixer
3D printing settings Prints without support Use PLA for the best results MATERIAL: PLA / ABS LAYER HEIGHT: Recommended: 0.2mm EXTRUSION WIDTH: Recommended: Forced 0.4mm INFILL TYPE: Gyroid INFILL PERCENTAGE: Recommended: 40>#/p### WALL COUNT: Recommended:...

Step 1: Designing and soldering the Iron Giant-inspired PCB
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
Before prototyping my Iron Giant-inspired PCB design, I tested all connections and wiring with FireBeetle 2 ESP32-S3 and Beetle ESP32-C3. Then, I checked the BLE connection quality between Beetle ESP32-C3 and the Android application for transferring...

Step 1.1: Making connections and adjustments
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
// Connections // FireBeetle 2 ESP32-S3 : // Fermion 2.0" IPS TFT LCD Display (320x240) // 3.3V ------------------------ V // 17/SCK ------------------------ CK // 15/MOSI ------------------------ SI // 16/MISO ------------------------ SO // 18/D6 ------------------------...

Step 2: Designing and printing the Iron Giant-inspired case
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
Since I focused on building a budget-friendly and accessible mechanical anomaly detector that detects sound-based mechanical anomalies and diagnoses the root cause of the detected deviations via object detection so as to notify the user via SMS, I decided...

Step 2.1: Assembling the 3D-printed case
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
After printing all parts (models), I fastened the external battery (Xiaomi 10000 mAh power bank) into the main case via a hot glue gun. Then, I attached the PCB holder to the removable top cover via M3 screws and nuts. After mounting the PCB holder,...

Step 3: Designing a frequency-controlled apparatus to demonstrate mechanical anomalies w/ Arduino Mega
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
As explained earlier, each manufacturing system requires a unique approach to mechanical anomaly detection due to conflicting mechanical deviations, especially for interconnected processes. Therefore, engineers must deliberately specialize the optimal...

Step 4: Developing a Wi-Fi and BLE-enabled Android application w/ the MIT APP Inventor
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
Although this mechanical anomaly detector utilizes two separate development boards to operate, I wanted to enable the user to access all interconnected device features within a single interface, especially for data collection. Since I wanted to capitalize...

Step 5: Creating an account to utilize Twilio's SMS API
Instructions from Multi-Model AI-Based Mechanical Anomaly Detector
Since I decided to notify the user of the latest detected audio-based anomaly and the diagnosed root cause (faulty component) via SMS, I needed to utilize Twilio's SMS API. In this regard, I was also able to transfer the prediction date and the resulting...

|<
<
721
722
723
724
725
>
>|