Close

4954 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Work Accent Lighting
  • Instructions     from Work Accent Lighting
  • tl;dr; Open the LED strip controller from the bottomI got the LED strip off of Amazon and it seems like most of the strips use a very similar control module with an IR remote. A simple screwdriver is all it takes to pop off the bottom lid and inside...

  • The Tank Chassis
  • Instructions     from WW2 Tank Laser Tag Game
  • DFRobot was generous enough to send me two of their MiniQ Robot chassis. The chassis have plenty of mounting holes that allow you to add brackets. They come with two motors and wheels, along with two sets of caster wheels to add strength. The assembly...

  • Step 2: Photo Editing
  • Instructions     from Coin Card
  • I'm using GIMP, just because I have used it a few times. It is easy enough to get used to, especially when you can google just about anything you want to do on it. First, I need to decide which colours can be merged into one. I have 4 colours to work...

  • Key dublication
  • Instructions     from A simple casting mould for hot metal key copying
  • Step 1: Fill the cavity of the mould with Fimo or a equivalent polymer clay and flatten the clay e.g with a round pice of wood or core follower. To prevent the two clay parts from sticking together while making the key indentation, powder some talkum...

  • Step 2 Soldering the circuit
  • Instructions     from Music Accessibility
  • 1. prepare all the material :   An arduino sheildSoldering materials4 servo motors4 buttons120cm wires * 12 60cm wires * 8 2. Braid the wires This step is for better wiring management and for avoiding short circuits. Braid the 60cm wires...

  • Electric Kalimba
  • Instructions     from Electric Kalimba
  • Wiring it all upI soldered wires to header pins to make all the connectors I needed. If someone wasn't able or willing to solder (aside from the teensy), you could get away with buying lots of female header pins and krimp on electrical connectors. The...

  • Plexi
  • Instructions     from LawnRobot
  • Get a plexiglass sheet of 4-5mm thick. Cut a piece of 40cm by 30 cm. (You can use whatever you have handy but will have to adjust the instructions for thickness) Try to cut it as square as possible. Use the 3D printed vertical motor mount to draw...

  • rhombus
  • Instructions     from rhombus
  • Constructing the system by following Motorola's Application Note 1015 will be sufficient, with the exception that the schematic is missing 2 external connections on the MC68901. One of the timer outputs TCO or TDO needs to be tied to TC (transmit clock),...

  • Norman, Coordinate
  • Instructions     from Norman, Coordinate
  • Remove the battery pack resistor, install lithium cells Step 1: Remove the top piece of the battery pack. Step 2: Without breaking the switch or battery contacts, carefully cut away the current limiting resistor and LED lead wires.Clip and discard the...

  • Print the pieces for the hull.
  • Instructions     from n3m0 the autonomous boat
  • I used PLA for the first hull, it's plenty strong but I worry when I have to leave it in my car on a hot day.https://www.thingiverse.com/thing:3491904 I will try ABS or PETG for the next boat. If you try this please let me know how it works. Files are...

  • Power:
  • Instructions     from Coin Cell Power Guide
  • Power In to the board:5V via the USB-C connectorDaisy-chained from another Coin Cell Power board via either of the two JST PH 2-pin connectorsInput from any other source (like a lithium-ion battery) via either of the JST PH 2-pin connectorsPower Out...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday