Close

4954 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Pressure Cooker Vacuum Chamber
  • Instructions     from Pressure Cooker Vacuum Chamber
  • Step 3: Install the bulkhead fittingThis step is very easy, but it's also your biggest potential leak. Don't worry about that too much now; leak hunting is great sport in the world of vacuum chambers, and there's plenty of time for it later. Find your...

  • wireless microphone digital
  • Instructions     from wireless microphone digital
  • now using 2 x hacked lyrat 4.3 boards ( removed SD card sockets ) 2 x SX1276 modulesESP-IDF IDEESP-ADF IDEHistoric Record....1st attempt worked but was for 2.4ghzI used the Wireless Audio Module / MD85XXP1 that can be found here http://www.raytac.com/products.php?subid=18...

  • Making Connections
  • Instructions     from Steel Battalion Controller Teensy Adapter
  • The hardware part of this project is fairly straightforward. The hardest part is probably tracking down a Steel Battalion Controller.  Ebay prices as of 2021 show them running north of $300.  Admittedly this is probably not a problem as people...

  • Programming.
  • Instructions     from PanoBot
  • I used VSCode with PlatformIO to write and upload the code to the ESP32. Extract all the files to a convenient location and open the folder in the PlatformIO home. It should download and install the required libraries and frameworks automatically, as...

  • Blade
  • Instructions     from Electro Knife for Simulated Combat EleKSCo
  • Welcome to the final steps. Make sure the battery is out of the knife.We need to cut off part of the handle from each knife. Measure back from the finger-guard approximately 1 1/4" (30mm) and cut straight across with a saw. I used a hack saw with a 21tpi...

  • Rocking the Horses
  • Instructions     from Rocking the Horses
  • Phase 1: Step 5Write some Gcode!Learn how to properly initialize your machine. There are plenty of tutorials and explanations of this, but expect to have something like the following string of code at the top of your program: G21 (Units in millimeters)...

  • DIY RaspCade
  • Instructions     from DIY RaspCade
  • 3. DisplayThe screenThe screen we are using was part of a now discontinued case for the Raspberry Pi called the Qubit. It is a 7-inch IPS screen with a maximum resolution of 1024 x 600 and looks fantastic when up and running. If you are looking for the...

  • Norman, Coordinate
  • Instructions     from Norman, Coordinate
  • Mount the LEDs Step 1: Go along the LED chain, marking one side of each LED.Be sure that all LEDs are marked on the same side. Step 2: Cut the LED string to make a pile of individual, LEDs, each with a mark. Step 3: Thread the LEDs onto the proto board,...

  • Hardware
  • Instructions     from Virtual Forest
  • 1. From a length of 10 cm PVC pipe cut roughly 60 - 70 cm of pipe. This will house the Raspberry pi and the Ricoh Theta housing will rest on top of this. Insert the wooden fence pole into the PVC pipe and mount permanently with some wood screws through...

  • Considerations for building a cosmic ray detector
  • Instructions     from Cosmic Array
  • Cosmic Rays are created high in the earth's atmosphere (~30km) and the resulting shower of subatomic particles are what we can detect at sea level.  These particles interact with atmosphere, decay or are difficult to detect, but the muon the...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday