Close

2277 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

  • Building the AUV - Internal
  • Instructions     from Project Albatross
  • The internals of the AUV performed the heavy work of actually taking water quality measurements and controlling the submersible's buoyancy. Evidently, it also required a sophisticated mechanical design to fit the necessary components into the confined...

  • Time to solder everything!
  • Instructions     from Meditation Audio Pod
  • If you're happy with the whole experience (i.e. wires are long enough, response time is good, speakers stay on for how long you want, etc) it's time to connect everything together! I find soldering a lot of fun so it's one of my favourite parts...

  • Solarmodule preparation
  • Instructions     from I<3T
  • Carefully put solar module on some soft underground so the front does not scratch. Then cut the long wire to around 50cm (see backside image as reference). Everything will be put in the back of the panel and there is plenty of room.

  • Final Wreath Assembly
  • Instructions     from Arduino Advent Wreath
  • The most fun part was taking the circuit and wrapping pipe cleaners around everything. I put the PCB in the middle of the green circle, made sure that the candle pipe cleaners were in place, and used some other pipe cleaners for attaching the PCB to...

  • Making Sure Everything is working
  • Instructions     from UnifiedWater
  • It took me a long while to get things started. There was a lot of editing of libraries and Googling involved as documentation around connectivity was really limited to that one example above. But in the end everything worked. Below are some basic troubleshooting...

  • Bike improvement: fitting a rack
  • Instructions     from Bike improvement: fitting a rack
  • Go to the hardware store. For this project the following supplies were needed:2 x 50mm L-shaped mounting brackets1 x M6 screw, 40mm long1 x M6 washer1 x M6 locknut (it resists better to the vibrations than regular threaded nuts)2 x M5 locknuts (the rear...

  • Electronic
  • Instructions     from GRawler - Glass Roof cleaning crawler
  • The electronic part can be soldered to a breadboard. See the attached schematic for detail. I also attaches the eagle sch-file if you like to make your own pcb. To protect the electronic from moisture, everything including the batteries can be built...

  • Software
  • Instructions     from ESP 8266 Square Inch Wifi Datalogger
  • Upload test program and look at serial where you should see values from sensors. If everything works create google spreedsheet and copy gs script to script. You have to edit script and add there your spreedsheet id. After that create Pushing box account...

  • Closing everything
  • Instructions     from Emergency Exit Coffee Table
  • Also i bought two different PVC-pipes to put them into the table (see last picture). I was thinking about accordingly thick 90° PVC-pipes pieces, to the pot them on top of the table, so it looks like the pipes are coming out of the table into the...

  • CycloSound V4.0
  • Instructions     from CycloSound V4.0
  • Step 3: Mount and StuffNow, start mounting. Really screw as hard as you can. Give it all you got.Hang on. Sorry, I was giving instructions for something COMPLETELY different. Ah, here we are. Now, start mounting your components. Make sure whatever screws...

  • Wiring everything together
  • Instructions     from PocketWhale
  • This is gona be a long step... Below i'm putting wiring diagram (or something that suppoused to look like on). 1. Powerbank 2. Mi band 3. Solar charging board 4. Solar panels 5. LCD screen 6. USB C for powering raspberry pi 7. Magnetic conector...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday