359 Results for "open source ecology"

What are M5Stick and M5Stamp?
Instructions from ESP32 BLE Communication
M5Stack is a technology company that designs and manufactures anopen-source development toolkit, including hardware, programming platform, and IoT solutions. It was founded by Jimmy Lai in 2017 and isbased in Shenzhen, China. M5Stack created the M5Stick...

Full instructions
Instructions from Robô da Alegria ("Joy Robot")
Full instructions for building the robot now available at:https://www.instructables.com/id/Joy-Robot-Rob%C3%B4-Da-Alegria-Open-Source-3D-Printed-A/

UniJoystiCle
Instructions from UniJoystiCle
Download the UniJoystiCle iOS client from the App Store:https://itunes.apple.com/us/app/unijoysticle-controller/id1130131741?mt=Or download it for Android from Google Play:https://play.google.com/store/apps/details?id=moe.retro.unijoysticle&hl=enOr download...

Test which frequency your phone works on
Instructions from Cell Phone 4G LTE Repeater / Booster / Femtocell
Use a SDR (Software Defined Radio) to find out which frequency band your phone works on. This is actually really good fun and much easier than it sounds. The SDR costs about $24 and can be used with open source software such as GQRX with gives you a...

Get BerryLan
Instructions from WiFi Connection to a Raspberry Pi
BerryLan is available for all iOS (10.0.0 or later) and Android (4.1 Jellybean or later) devices. You can either search for "BerryLan" in the iOS App Store or Google PlayStore, or just grab the links from here: App Store: Get BerryLan for iOS PlayStore:...

Setup Auto Execute on Startup
Instructions from Raspberry Pi Kegerator Monitoring
Source: http://www.instructables.com/id/Raspberry-Pi-Launch-Python-script-on-startup/Create the launcher script. sudo nano launcher.shAdd the following lines and save/close the file. #!/bin/sh # launcher.sh # Navigate to home dir, then to program...

End Notes
Instructions from Custom PCB Using a Low Power Laser Engraver
Thanks for reading my tutorial and watching the video. I hope you liked them and that they would be useful in some way! Do not forget to like and share this project with your friends. Your support is very important! :D If you still don't follow my tutorials,...

Installation Quick Guide
Instructions from One touch cozy mood
To start this project :- ^ After downloading the zip, you will see oneTouchCozyMood folder in that, there are five folders: 1) Data, 2) Delete_Users, 3) Enroll_Users, 4)Music_Player, 5)Unit_Test ^ Run the below commands to download our source code...

Final Considerations
Instructions from Wi-Fi Controlled Robot Using Blynk App
I put a lot of effort into this project, to make it as clear and educational as possible. If you liked it, please don't forget to 'like' and 'share' it. Your support is very important for me! :D If you still don't follow my tutorials, take a look at...

Final Considerations
Instructions from Arduino Robot With PS2 (PlayStation 2) Controller
I put a lot of effort into this project, to make it as clear and educational as possible. If you liked it, please don't forget to 'like' and 'share' it. Your support is very important for me! :D If you still don't follow my tutorials, take a look at...

▇▇▇▇ Next Steps ▇▇▇▇
Instructions from FPGA Bootcamp #3
If you want to get more experience with this hardware, you might enjoy a two part series on Hackaday that covers adding a UART and a PWM module to create a PWM peripheral. It is a good example of how you can keep adding more and more PWM modules and...

Daisy Kite Airborne Wind Turbine
Instructions from Daisy Kite Airborne Wind Turbine
Respect the hard work and dedication to a better existence given by the open source community. Thanks must go to Grasshopper 3d algorithmic modeling language for rhinohttp://www.grasshopper3d.com/And Thanks now in no particular order to...David...

Flypi - cheap microscope/experimental setup
Instructions from Flypi - cheap microscope/experimental setup
Printing the necessary parts from the scad fileNecessary parts:OpenScad (free open source software, can be downloaded here).The scad file containing the Flypi's 3D model, can be found on the project page, in files.Steps (images below):Use OpenScad and...

Firmware build
Instructions from Orthrus
To build the firmware, use Atmel Studio 7 and Atmel Start. This will make an ASF4 codebase from the .atstart file in the GitHub repository. Download the .atzip from Start and open it in Atmel Studio. You need to patch the result in a specific way:You...

Wearing the HeartyPatch
Instructions from HeartyPatch: A single-lead ECG-HR patch with ESP32
To wear the HeartyPatch: Turn ON the HeartyPatchSnap-in two disposable electrodes to the two snap connectors on the backPeel off the sticker backing on the electrodesstick it on the left upper side of the chestIn about 5-10 seconds, the device will adjust...

1
2
3
4
5
>
>|