5118 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

4G LTE Yagi antenna for ATT
Instructions from 4G LTE Yagi antenna for ATT
Change back to your brad point drill bit. You are going back over the 1/8th in holes you just made to countersink the rivets.Drill the first hole, until the top of the rivet will be flush. You'll remove about half the thickness of the 3/4in tube to do...

4G LTE Yagi antenna for ATT
Instructions from 4G LTE Yagi antenna for ATT
Get some rivets long enough to go fully through your director. The normal 'long' 1/8th in AL rivets at my local hardware store were perfect (with the countersink created in step 10).

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
BUILDING THE UPPER FRAMETools - Miter Saw, Jig Saw or Tin Snips, File, Drill with #30 drill bit,Rivet PullerA) Build the Jig for the Upper FrameTo properly build the frame, jigs are required to hold all of the frame elements in place. The jig is constructed...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Mounting the EngineTools: 5/16" Wrenches and SocketsA) Prepare the Engine1) Check the wiring and redo the connectors2) Remove the excess choke hardware3) Remove the excess throttle hardwareB) Bolt the Engine to the FrameUsing (4) bolts, (4) lock washers...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Building the ExhaustTools: Chop Saw or Reciprocating Saw, Files, Welder, Torx (T40) bit, Socket Wrench, 1/4" and 7/16" socketsA) Cut the materialsUsing the chop saw or reciprocating saw, cut the 1" diameter U-Turn and the 135 Bend, as well as the 1 1/8"...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
Required Components:The component list for this computer is fairly low as only a single IC is required: 1 x ATmega 1284P Microcontroller 1 x DIL 40 Pin 0.6" IC Holder 1 x 40 Pin Female Pin Header (to be cut down into smaller headers) 1 x 16 MHz Crystal...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
The Circuit:I designed the circuit diagram in the program Fritzing as it had all the required footprints readily available. The circuit is fairly simple as the ATmega 1284P has the minimum hardware connections required (along with a 16MHz crystal) to...

Android VLC Remote Foreign Language Mod
Instructions from Android VLC Remote Foreign Language Mod
linus@1015PX:~/project$ ack-grep aspectandroid-vlc-remote-1e95d35ac1d2/res/values/arrays.xml44: @string/aspect_ratio50: aspect-ratioandroid-vlc-remote-1e95d35ac1d2/res/values/strings.xml54: Aspect ratioandroid-vlc-remote-1e95d35ac1d2/res/values-es/strings.xml57:...

Communication between two hc-05 Bluetooth modules
Instructions from Communication between two hc-05 Bluetooth modules
Now setting the module to Master mode is as simple as sending the command AT+ROLE=1. If you get back OK then you've successfully set you're module to master role.

Communication between two hc-05 Bluetooth modules
Instructions from Communication between two hc-05 Bluetooth modules
Using a terminal emulator such as Tera Term create a serial connection to the slave module. The default settings for mine were 9600, N, 8, 1. If you don't remember the COM port number, open the Device Manager and look under Ports.

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Below is a list of build instruction logs that will instruct you on how to go all the way from sourcing your components to printing the parts, and constructing your very own raman spectrometer!To begin, you will need some tools.. Pretty much every...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 1A Completed objectiveLens MountComponents Required: Printed versions of the following 3D Printed Objects from the gitHub repository: (1x) optics_module_objectiveLens_bottom(1x) optics_module_objectiveLens_top(1x) 100x Microscope Objective...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 2A completed beamSplitter AssemblyComponents Required:Printed versions of the following 3D Printed Objects from the gitHub respository:(1x) optics_module_beamSplitter_bottom(1x) optics_module_beamSplitter_top(1x) optics_module_beamSplitter_accessPortCover(1x) optics_module_beamSplitter_splitterMount(1x)...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 3A completed Laser Shutter AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub respository: (1x) mechanical_device_laserShutter_bottom(1x) mechanical_device_laserShutter_top(1x) mechanical_device_laserShutter_bypass(6x)...

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Section: 4A Complete Mirror Mount AssemblyComponents Required: Printed versions of the following 3D Printed Objects from the gitHub respository: (1x) optics_module_surfaceMirror_bottom(1x) optics_module_surfaceMirror_top(1x) 1 Newport...

|<
<
5
6
7
8
9
>
>|