13548 Results for "《〈 문의 OIO↗5793↗7458 》〉강남초원의집㉩⅓everythingァ강남유흥강남룸㏁evidently 강남초원의집강남더킹 강남더킹‡강남룸Ⅹfaintly㈆"

Build Instructions
Instructions from Octoshield
The board is using a mix of SMD and THT components but everything can be solder with a simple soldering iron, starting with all the SMDs before the through hole components on the top face and then the bottom face.

Disassemble keyfob
Instructions from Adaptive wireless switch
Use a small screwdriver to split open the plastic case of the keyfob near the key ring clip. Remove the circuit board and discard everything else, including the batteries. Transparent tape holds the two metal pushbutton in place. Remove the tape and...

If everything is ok the list with the games installed on SSD will appear on OPL screen
Instructions from TankServer
At the moment of test only Gradius V iso was present ed on SSD.

Assemble the two "halves" of the exciter
Instructions from 3D Printed Audio Exciter
At this point, you can attach the coil, running the leads out the hole, and screw everything together:

Cladding
Instructions from Capacitive Gamepad
Soak some brown paper in diluted glue and cover the face for aesthetics. Skip this step if you're not worried about looks. Alternately just paint everything when you're done, my experience suggests the touchpoints will work flawlessly through a coat...

assembly
Instructions from Pocket NC jog controller
secure led, button and jog wheel so it look at the front of the controller. wire up all component like this: solder everything.

Wood Working
Instructions from DIY emergency power system - a field report
After the wiring was done, I lined the inside of the box with wood and connected everything with wood glue. The panel above the battery is only laid on and can be opened for maintenance purposes.

Step 4
Instructions from Grounded Dell 45W PD
Put everything back. The plastic covers might be loose so you can apply a little bit of glue. hot glue is preferred as it don't generate fumes. otherwise one or two drops of epoxy will do. Or just use straps, tapes or whatever.

Soldering and testing
Instructions from Audi e-tron with 555
Everything is easy to solder, I chose 0603 sized components and the 555 is a SOIC sized 8 legged chip. Before turning the "engine" ON, I would recommend to measure the voltages on the IC and control the right position of the coin cell battery.

Explore the Jetson nano
Instructions from Expiration Date App
It is important to know how to acsess everything in the jetson nano from the LX terminal to the web browser. You can watch videos that show you how to acsess all the features of the jetson nano or expierment with it yourself.

Quick Test
Instructions from Customizable 5 Buttons WiFi Smart Home Switch
After everything is done and firmware has been flashed, give it a quick test by powering both device. If both device are working, you shd see the switching motions of the device is pretty much instant with little to no delay as all communication are...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
Completed PCB: Once I had all the components and had received the PCB, I assembled it and carried out some basic multimeter tests ensuring no short circuits were present (mainly ensuring no pins had shorts to the ground plane). No issues were present...

How to make: Augmented Reality Pokemon CARD Game
Instructions from How to make: Augmented Reality Pokemon CARD Game
Step 7: Everything Should Work...OK, now everything should work. If it doesn't or you have any problems I tried to add all the steps in detail in the video.The last step is to build for Android or Xcode (if you want to build for an iPhone or iPad).Android...

Jukebox sound system for the hackerspace
Instructions from Jukebox sound system for the hackerspace
Hook everything up and test it:Everything here is rather straight forward, but we'll cover the pitfalls we encountedWe mounted the pi to the back of the touchscreen with a set of motherboard spacers, then the amp on top of that againTo power it we grabbed...

Check everything
Instructions from Rear view camera for electric wheelchair
Now that you have configured everything it is time to do a short check (before everyhting is more difficult to access).Reboot the raspberry. Connect to the WiFi if the raspberry with your mobile phone. Connect a streaming video client (e.g. VLC which...

|<
<
3
4
5
6
7
>
>|