1137 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗강남퍼블릭ㅾ퍼블릭술집partner셔츠룸퍼블릭㎙퍼블릭사이즈furnished 퍼블릭룸⑴퍼블릭사이즈㏃퍼블릭룸ふ㏘셔츠룸퍼블릭hospital"

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
BUILDING THE UPPER FRAMETools - Miter Saw, Jig Saw or Tin Snips, File, Drill with #30 drill bit,Rivet PullerA) Build the Jig for the Upper FrameTo properly build the frame, jigs are required to hold all of the frame elements in place. The jig is constructed...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Mounting the EngineTools: 5/16" Wrenches and SocketsA) Prepare the Engine1) Check the wiring and redo the connectors2) Remove the excess choke hardware3) Remove the excess throttle hardwareB) Bolt the Engine to the FrameUsing (4) bolts, (4) lock washers...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Building the ExhaustTools: Chop Saw or Reciprocating Saw, Files, Welder, Torx (T40) bit, Socket Wrench, 1/4" and 7/16" socketsA) Cut the materialsUsing the chop saw or reciprocating saw, cut the 1" diameter U-Turn and the 135 Bend, as well as the 1 1/8"...

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Engine ServosA) Cut the sheet metal for the mounting bracketB) Scribe the linesC) Drill the holesD) Cut the sheet metalE) Bend the sheet metalF) Mount the servosG) Connect the throttle arms

Goliath - A Gas Powered Quadcopter
Instructions from Goliath - A Gas Powered Quadcopter
Fuel SystemA) Prepare the partsB) Install the Fuel PickupUsing a piece of wire pull the fuel pickup into the tank though the vent holes and up through the hole in the top of the tank.C) Place the tank on the vehicleDon't permanently attached it yetD)...

Single Chip AVR BASIC Computer
Instructions from Single Chip AVR BASIC Computer
The Firmware: The standard TinyBASIC Plus sketch had to be modified in order to create a standalone computer system. The unmodified version of TinyBASIC Plus uses the serial port of the AVR to allow users to interact with the software and create programs....

DNA Lamp
Instructions from DNA Lamp
SolderUse a reflow oven, a hot air soldering station... You can try cheap hot air gun or maybe a soldering iron but I tested only the oven and rework station...With my solder paste (the cheapest one on dx.com), a good setting on my reflow station is...

Turn a cigarette lighter into an IR Nikon remote
Instructions from Turn a cigarette lighter into an IR Nikon remote
5.Program your microcontroller with the following BASCOM code:''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''''' Infrared Remote Control Transmitter for Nikon D90' -------------------------------------------------'' ...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ TESTING SOUNDCARDS ]# Testing the internal soundcard with headphones:speaker-test -c 2 -s 1 -t wav -w /usr/share/sounds/alsa/Front_Left.wavspeaker-test -c 2 -s 2 -t wav -w /usr/share/sounds/alsa/Front_Right.wav# Testing the USB soundcard with headphones:speaker-test...

ZRTP Hardphone
Instructions from ZRTP Hardphone
# Now you should be able to make and receive secure ZRTP calls. Launch the twinkle console and try some commands:twinkle -ccall 9196byehelpcall thetestcall@sip2sip.info

LoFi
Instructions from LoFi
LoFi is written in C using the open source GCC compiler built into the free Atmel AVR Studio IDE v6.2. Download and install AVR Studio if you haven't already.http://www.atmel.com/tools/atmelstudio.aspx

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Lexitron circuit design and hardware:LED display: The display is constructed using Red 8x8 square LED matrix displays, each containing 64 LEDs wired in a square grid with the 16 column and row pins available out the base. It is designed to be used in...

Lexitron RSS Reader
Instructions from Lexitron RSS Reader
Tickernut firmware:Ethernut is an Open Source Hardware and Software Project for building tiny Embedded Ethernet Devices. It consists of a set of hardware designs all running an open source operating system called Nut/OS and a TCP/IP protocol suite named...

1Charger
Instructions from 1Charger
Flash ATtiny8611. build software 1charger_src ver 0.95 with WinAvr and Code::Blocks Read this for basic ATtiny development .... cd C:\1Charger\src make clean make 2. Flash avrdude -p t861 -c...

Smart Cap
Instructions from Smart Cap
Step 5: Setting up the voice recognition software for your DIY head mounted display Different screenshots from the head mounted displayI have prepared an interactive voice response system that responds to certain voice commands and gives you appropriate...

|<
<
1
2
3
4
5
>
>|