2867 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 쓰리아워가격Н 쓰리아워relief강남쓰리아워쓰리아워가격강남쓰리아워distributing 쓰리아워레깅스룸ⅰ㉤강남술집정보hurry"

ChipWhisperer®: Security Research
Instructions from ChipWhisperer®: Security Research
Optional (see #5, option of hard or soft enclosure): Make an enclosure out of a Hammond 1455N1602 case (Digikey part # HM980-ND). This case has plastic end panels which you can easily modify with a hot knife, file, etc. For the front panel you can print...

IRK! Infrared Remote USB Keyboard
Instructions from IRK! Infrared Remote USB Keyboard
Through Hole Technology (THT) versionThis is how I built the Through Hole Technology version Make a double-sided fibre glass PCB (see front- and back- PDF files below). There are several ways to do this. The way I do it is to print the front and back...

Atari 5200 Custom Controller Build
Instructions from Atari 5200 Custom Controller Build
The problem lies in the lack of response, over time the little pads inside become corroded and unresponsive. Eventually, no amount of cleaning and disassembling actually fixes this and you end up replacing either the entire controller or purchasing one...

DMM that listens and talks
Instructions from DMM that listens and talks
Well that is for measurement part, for recognising the commands as you must have read above we are using this EasyVR module. Check its manual for training part, and as there isnt a library available for it for AVR we have made it available on our...

Raptor12 Wireless AC Dimmer
Instructions from Raptor12 Wireless AC Dimmer
SKIP THIS STEP TILL LAST. Regulator on other side and caps need to be soldered first.Here is the NRF module use the correct holes for your chosen modules. The pa module shown here goes int he connector closes to the edge, while the small nrf module goes...

A 25 cent Phone to Microscope Adapter
Instructions from A 25 cent Phone to Microscope Adapter
To hold the iPhone into the foam block, I routed a pocket the same size as theiPhone into the top of the block. Normally, I would have routed the holea little bit larger than the phone to ensure that it would fit, but by making the pocket the same size,...

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
I borrowed an idea from my friend Mads Hobye for my enclosure. Mads founds these sleek boxes at the container store and used them to make project enclosures for the various musical instruments he's built. These boxes are particularly convenient because...

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
For the final firmware, I've extracted all the code that controls the buttons and leds into a library to make it more tidy, all of this is in a class called SugarCube. I was inspired by the work I've been doing on the Instructables iOS app, and wrote...

HPDL watch
Instructions from HPDL watch
Let's start with PCB. I wanted to mound display on one side of the PCB and the uc - on the other. Unfortunatelly, uc barely fits in the middle of the display's back and some pinout traces of display and uc touches where they mustn't. The traces...

FireCoates
Instructions from FireCoates
Bike ModuleWire up the bike side module. I made up a really straight forward picture for this:You can solder everything down to one of the mini perf boards to hold everything solid and mount it into the project enclosure like I did, or design your own...

FireCoates
Instructions from FireCoates
Jacket ModuleThe jacket module is even simpler to set up than the bike module. The image below is a diagram for the setup of the jacket module. It is extremely simple as everything is socketed aside from the headphone jack.You will need to hook up an...

FireCoates
Instructions from FireCoates
Jacket Wiring, LED Setup, and Light Pipe Assembly.I never took pictures of this process with the first prototype so I need to complete the second prototype and take pictures to use as visual aides along the way, I should have them up in another week...

FireCoates
Instructions from FireCoates
Optional 3D Printed Jacket Module CaseDownload the Base and Top to the case and print them on your favorite RepRap OpenSource 3D Printer. It should come out looking similar to this(colors may vary ;) ):The headphone jack hole may need to be cleaned up...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Drill front and base, mount front on base plateStraight forward: My banana jacks needed 8 mm holes, the cable glands needed 12 mm-ish (12.5? I'm not sure what I used), then there's 5 mm for the switch and 3.2 mm for the LEDs, and finally 8.5 mm for the...

ATX power supply conversion for bench usage
Instructions from ATX power supply conversion for bench usage
Drill front and base, mount front on base plateStraight forward: My banana jacks needed 8 mm holes, the cable glands needed 12 mm-ish (12.5? I'm not sure what I used), then there's 5 mm for the switch and 3.2 mm for the LEDs, and finally 8.5 mm for the...

|<
<
2
3
4
5
6
>
>|