270 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

Controllers
Instructions from Thrifty Pick and Place
The controller that comes with the Elekslaser is the EleksMaker® ManaSE (version unclear) which is an arduino nano and supports two A4988 driver modules. I am using this to control the C axis and may use it's motor port - spindle speed - to control...

CODE
Instructions from Open-Source Shallow Water Glider
The first code chunk declares the variables and establishes connections #include #include "Wire.h"#include #include "GravityTDS.h"#include #include #include "MS5837.h"#include "ping1d.h"#include "SoftwareSerial.h"#include "RTClib.h"#include //#include...

Create a function to decode the payload
Instructions from 2022 HDP 4 - Climate Resilient Communities
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...

Nextion LCD Touchscreen Tutorial for Arduino
Instructions from Nextion LCD Touchscreen Tutorial for Arduino
Installing Firmware via an SD CardFor this first part of the tutorial we are going to be using a firmware that demonstrates a couple of buttons, a progress bar and a text field.In the firmware folder in the library you will find the .tft files:2.4" Nextion...

Make the Mass Holder
Instructions from Seismometer
I used an empty tomato paste can to hold the lead weight of the mass. (A tomato sauce can is too wide.) shorten the can to be approximately 1.5" tall.drill a 1/4" hole in the center of the bottom of the can.push a 1.5" long 1/4 x 20 bolt into the...

Breadboard, Meet Breadstick!
Instructions from M4-Breadstick (Retired) → Raspberry Breadstick
Now that the connector's flipped and the memory's soldered on, time to mount it to the breadboard. I like to snap my header pins off using pliers, because doing this next task with flush-cutters would result in 20 mini-metal-missiles ricocheting around...

Back Panel
Instructions from Modular Display Clock
The components are attached to a baseplate (95(W) x 128(L) mm), which is fitted to the back of the MDE's with M3 X 25mm bolts and 10mm standoffs. Four bolts are fitted through the holes in the Neopixel support board and the standoffs fitted to attach...

Non-Invasive Alzheimer's Light Therapy Devices
Instructions from Non-Invasive Alzheimer's Light Therapy Devices
Now that all the required circuits are finished, their corresponding programs can be uploaded onto the ESP boards. Code for remote circuit: //#include #include #include #include //#include //#include "Adafruit_MQTT.h" //#include "Adafruit_MQTT_Client.h"...

Extruder stepper motor assembly
Instructions from Bloft Mk2 - 3D printer for plastic waste
Screw the extruder nozzle in the barrel to prevent the extruder screw from falling too deep into the barrelSlide the angular contact bearing on the compression screw until it is flush with the small flangeInsert the 5 x 5 x 20 mm key into the slot at...

Run a Program
Instructions from Analog Speedometer Using Arduino and IR Sensor
#includeLiquidCrystal lcd(A5,A4,A3,A2,A1,A0);#include const int stepsPerRevolution = 200; // change this to fit the number of steps per revolutionStepper myStepper(stepsPerRevolution, 8, 9, 10, 11);volatile byte REV; unsigned long int rpm,RPM;unsigned...

Twiz
Instructions from Twiz
In the 2 batch, we got 20 faulty CPUs, we tried the X-ray of a Paris hackerspace mate who works in a hospital:...it didn't help much but my heatgun became my best friend:Berfore changing it a few tests were performed:Made in BlackLoop (Paris Hackerspace)....

Ridiculous [LCD] Display Hacks
Instructions from Ridiculous [LCD] Display Hacks
Fight with settings for days on end to find out that it's not that X is crashing, but that GDM3 (gnome-desktop) doesn't work with xinerama, because xinerama doesn't work with 3D rendering, and GDM3 won't work AT ALL without it. So instead you get two...

What We'll Need
Instructions from RPi 9000
We will need:Raspberry PI 2 Model B ($25)Raspberry PI Power Cord ($5)WiFi USB with Antenna for Raspberry Pi ($9)Used Titanium Super Wide Lens 0.42x AF (~$4)Metallic Spray Paint (~$4)Generic 7.1 Channel USB External Sound Card (~$4)Used Insten USB Digital...

Gearwheels assembly
Instructions from Universal Speed Reducer
Components list : 1 x Gearwheel 20 teeth1 x Gearwheel 19 teeth2 x Roller Bearing 8x22x76 x Screw M3x10 Insert the roller bearing in each gearwheel 2. Screw the six M3x10

Launching Stepmania
Instructions from Stepmania 5 compile for ARM (Jetson TK1)
1. Launching Stepmania in X outside of desktop: sudo service lightdm stop xinit /home/ubuntu/stepmania-src/stepmania -- :9 2. Launching with launcher.sh that pauses for Sound Manager to finish init (TK1-specific, placed the following in launcher.sh):...

|<
<
2
3
4
5
6
>
>|