Close

1346 Results for "↘ 최저가 Ò1Ò〈⑻⑷89〉83Ò⑥ ↗ 강남쓰리아워ㅻ lightly강남쓰리아워┎쓰리아워가격cathedral 쓰리아워ｎ쓰리아워⑤쓰리아워еу강남술집정보hers"

  • Knowhere
  • Instructions     from Knowhere
  • Type this into your RasPi Terminal to download the transmission code. This isn't ours, I must credit the original makers of the RasPi radio, Icrobotics.wget www.icrobotics.co.uk/wiki/images/c/c3/Pifm.tar.gzThen type Isthentar -xvf Pifm.tar.gzAlso,...

  • JudgeTron 9001
  • Instructions     from JudgeTron 9001
  • Ofcourse, I now needed to see if the interfacing with the biological units worked. Here's a nice picture of the biological units that embed the neural networks that will be doing the judging. Google seemed to have good success by using pigeons, so I...

  • Open IR Tracking Module
  • Instructions     from Open IR Tracking Module
  • Finally we can run the combined code, actuating the servo with the Wii IR camera output. This is the proof of concept type of project. After proving that this is possible we can go on to building more complicated projects with confidence that we can...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Supporting InfrastructureFarmBot Tracks need to be attached to supporting infrastructure. Where you decide to install your FarmBot will determine how you setup your Tracks and therefor what supporting infrastructure you need. You might attach your track...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Assembly PreparationIn order to shorten the time it takes for you to assemble your FarmBot hardware, follow these preliminary steps. 15 minutesThis is the estimated time it will take for assembly preparation.Organize your PartsWhen you first open up...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Electronics Assembly45 minutesThis is the estimated time it will take to setup the Electronics.Step 1: Setup the Raspberry PiFollow the instructions on the Raspberry Pi Software page to install the necessary software onto the Raspberry Pi.Step 2: Assemble...

  • lua-stick
  • Instructions     from lua-stick
  • Excecute softwarePush the rotary switch and let the fun begin: every 0-10 seconds the stick will type "hello world" . Be careful: it really types it. Unplug the stick to stop.

  • Macro Storm
  • Instructions     from Macro Storm
  • Now just record your macros. I wrote a program for this, but you dont need to use it.click a switch, click record, type your keys, hit record again when done.once all your keys are set how you like em, click the generate code button and the code for...

  • Pin Header Soldering Platform
  • Instructions     from Pin Header Soldering Platform
  • Add the top platform.For the actual platform we will be use a second half-sized perma-proto... Any size will do, really, but the top and bottom should be the same type.Attach the top perma-proto.Use two more screws from the top to attach the top perma-proto....

  • DoorPhone
  • Instructions     from DoorPhone
  • Acquire root for this session, unless you want to type sudo before every command... sudo -iUpdate and Upgrade:apt-get updateapt-get upgradeInstall Dependencies:sudo apt-get install libncurses-dev libsdl1.2-dev libsdl-image1.2-dev libavcodec-dev libswscale-dev...

  • Fresh-Air 1.0
  • Instructions     from Fresh-Air 1.0
  • I have a few of each type of PC board available and I have the Express PCB files. If you're interested let me know and we'll work something out.
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday