Close

4954 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸㈄ 『 모든문의 OIO=5793=7458 』 Ηcake²셔츠룸테란강남셔츠룸デwriter 셔츠룸테란강남셔츠룸 선릉셔츠룸⒁셔츠룸사이즈┲exhausted⅔"

  • Assess and Plan
  • Instructions     from Electric Heart
  • Before you begin building this device, figure out what you're going to use it for. What voltages should it output? What current level? What will the variation be in the load you are driving? Is this going to be a general lab power supply, or are you...

  • Conclusion
  • Instructions     from Accuracy-Sensing Smart Sports Rebounder with ESP32
  • This proof of concept demonstrates that it's possible to track and log a soccer ball's landing position on a sports rebounder without using a webcam - instead, you can feed the output of several accelerometers into a trained recurrent neural network...

  • Sound Check
  • Instructions     from Retrex Audio
  • This is the quick hack of another code sample "Register writer" to play a warm up sound. The hardware is based on the schematic linked in the code. Works with Arduino Uno R3 aka: 328 compatible boards. https://pastebin.com/raw/FehmVLQS /*******************************************************************...

  • EDID Inserter
  • Instructions     from EDID Inserter
  • Besides a special build of PowerStrip (for Windows) available upon request only,some rare EDID-writing code is still archived online but never made it into mainline due to the serious risk of picking the wrong EEPROM:If you wipe the one on a DVIADD card,...

  • All of the steps for the project!
  • Instructions     from Air Pollution Monitoring Project
  • Let’s get to it! Install Arduino IDE, the esp32 board and the Fixed Libraries. To install the ESP32 board in your Arduino IDE, follow these next instructions: 1) Open the preferences window from the Arduino IDE. Go to File> Preferences 2) Enter https://dl.espressif.com/dl/package_esp32_index.json into...

  • Code
  • Instructions     from ESP32 Personal Bat Signals with Light and Sound
  • I used micropython, because I haven't used it for a project yet and I was shocked how well it worked for this. There are many tutorials on how to use Thonny with an ESP32, and I found it to be much quicker than doing this in Arduino/ C++. The main files...

  • Hummingbird
  • Instructions     from Hummingbird
  • Step 3: Connect to VivaPlanetThis next step is a bit more complex and requires some C# and visual studio with the Gagetter software from GHI Installed. This will take some time...persist it will be worth it in the end...There are a lot of great tutorials...

  • Arduino-Compatible FPGA Shield
  • Instructions     from Arduino-Compatible FPGA Shield
  • Step 2 - Import the Arduino board file into Altium Designer:  Using Altium Designer (AD) requires that I import Eagle board into AD.  AD14.x includes an Eagle importer.  Used source files from the Arduino site to import in AD.  

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • VLC:Live transcoding is resource intensive, making it nice to be able to turn it on and off. Also switching the VLC configurations allows for many variations of size and quality, useful in tailor the stream to different devices and scenarios. Below are...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • This is the code I used for the right frame in the first picture.#!/usr/bin/perl#use CGI qw/:standard/;use URI::Escape;my $cols = 3;my %button_codes;$button_codes{'1'}='BTN_1';$button_codes{'2'}='BTN_2';$button_codes{'3'}='BTN_3';$button_codes{'4'}='BTN_4';$button_codes{'5'}='BTN_5';$button_codes{'6'}='BTN_6';$button_codes{'7'}='BTN_7';$button_codes{'8'}='BTN_8';$button_codes{'9'}='BTN_9';$button_codes{'0'}='BTN_0';$button_codes{'Ch-'}='KEY_CHANNELDOWN';$button_codes{'Ch+'}='KEY_CHANNELUP';if...

  • DIY SlingBox $30
  • Instructions     from DIY SlingBox $30
  • #!/bin/bash##recording1.shirsend SEND_ONCE --count=2 radioshack BTN_4irsend SEND_ONCE --count=2 radioshack BTN_6mencoder tv:// -tv driver=v4l2:norm=NTSC_M:width=720:height=480:outfmt=uyvy:device=/dev/video0:input=0:fps=25:buffersize=16:alsa:amode=1:forcechan=2:audiorate=48000:adevice=plughw.1,0:forceaudio:immediatemode=0...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday