After building, training, and deploying my object detection model as an Arduino library on Edge Impulse, I needed to upload the generated Arduino library to FireBeetle 2 ESP32-S3 to run the model directly so as to recognize the specialized components...
The clock can be built in 4 or 5 meetings with kids. Recommend ages 10 - 18. Younger kids will need more help. One person can handle 8 - 10, with more you will need some help First meeting 1. I talk about what an...
Second meeting 1. Hand out the Arduino, RTC module, wires, alligator clips, USB power block and USB cable 2. I ask them how we are going to have the Arduino control the meters ? I explain what PWM signal is and how we can use...
I recommend splitting the group up into two sections. A lot of prep work is required for this meeting. You need to have milled all the faceplates (hours and min), I made a couple of extras. The plywood boxes also need to be lasered...
Note: The code is intentionally heavily commented to provide maximum assistance to those who wish it. You can also download the files (with fewer comments) from my GitHub. // Enable WiFi connectivity and secure communication over the internet #include...
What’s up my friends, welcome back. This below is the PCB that I’ve designed for my project. I’ve tried to make it as small as I could so it could fit inside of a basic wall electric box. This project works at 220V so make sure you stay safe and...
Let's see all the needed parts and also check the schematic for this project below in order to know where to connect each part. We need the 220V to 12V regulator, the solid-state relay, an ESP32S smd version, some SMD capacitors and resistors, a diode,...
We used a 55 x 35 mm prototype board for Level 2 of this project and added three push buttons to it: two 6 x 6 mm push buttons for up and down, and one 12 x 12 mm push button for fire.Next we added Three 1K Resistor with each push button.The resistor...
Here's the result of this small build- a completely functional portable game console, loaded with the classic space trash game from old Nokia phones. The ESP32C3 chip is the reason that this setup functions flawlessly. Although the code is somewhat lengthy,...
Now affter testing everything, try fitting the screnn into the shell, if nessesary remove some plastic with an exacto knife. If it fits try around with the other parts:The Speaker should fit if you're using an original GBA one, or a little cut on one...
The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used. The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...
Check for Existing .bash_prompt:First, you need to check if there's already a .bash_prompt file in your home directory. Execute the following command: ls ~ -a | grep .bash_prompt Rename Existing '.bash_prompt': If you find an existing .bash_prompt and...