Close

30 Results for "%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F%3E %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%88%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5 %E2%88%83%EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%8F%EA%B0%95%EB%82%A8%EB%A3%B8%C2%B1 %EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5 %E2%88%91%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1 %EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%80%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%2B %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%E2%88%86 employee"

  • Free run (optional)
  • Instructions     from 68020 minimal homebrew computer
  • Although optional, it is highly recommended to test the board so far with the free run test. Connecting the databus to the ground, the CPU will read in 0x0000.0000 as an instruction and will execute a kind of NOP (in fact, it will execute ORI.b #0,D0)....

  • Upload the Source Code to Arduino
  • Instructions     from Useless JokeBot
  • Here’s the programming rationale behind the code, which you can download from the project files. The main idea is to generate a punchline that does never matches the joke. This makes the whole sentence not particularly funny, and probably confusing. ...

  • Purchase your fans
  • Instructions     from PC 140mm Air Filter
  • Head out to DigiKey and find some fans you like.  Here is a query to get you started. 12V4-pinTube axialStatic Pressure at or above 0.5 inches of H20Sizes (square) 70mm80mm92mm92.5mm119mm120mm NOTE:  The GitHub repository only includes OpenSCAD...

  • Camera and LED Panels mounting
  • Instructions     from A DIY Imaging Fluorometer
  • Here is where the fun starts. Find the centre of the heatsink and drill a 16mm hole. This is to accommodate the USB 3 cable to connect the camera and the LEDs wiring. Put the USB cable through the hole and connect it to the camera. Please the camera...

  • What are M5Stick and M5Stamp?
  • Instructions     from ESP32 BLE Communication
  • M5Stack is a technology company that designs and manufactures anopen-source development toolkit, including hardware, programming platform, and IoT solutions. It was founded by Jimmy Lai in 2017 and isbased in Shenzhen, China. M5Stack created the M5Stick...

  • Purchasing Electronics/parts
  • Instructions     from Jeremy The Butler Bot
  • First step to build Jeremy is to purchase all the materials. You will need the followingElectronics:X1 Adafruit Wave shield (https://www.adafruit.com/product/94)X1 Arduino Mega (https://store.arduino.cc/usa/arduino-mega-2560-rev3) (note: any Arduino...

  • Heated Bed for M3D 3d Printer
  • Instructions     from Heated Bed for M3D 3d Printer
  • Mounting resistors and panelIf you have the second 85 mm square sheet cut as well place it in the middle of the bigger cut sheet. You can temporarily use tape to stick them together and make sure they fit into the printer together. If they don't check...

  • Roll Motor
  • Instructions     from Open-Source Shallow Water Glider
  • Print the ServoRollMotorMount and attach the servo. This section will then attach to the brain housing. The servo can be plugged directly into the PCB. The ServoRollMotorMount print can be attached with square-stock. This unit will then connect to the...

  • Dirt Barrel
  • Instructions     from Dirt Barrel
  • The inlet is built in a similar way.A piece of PVC pipe is prepared with some slots to allow clamping of the inlet tube:The pipe is held by two square pieces of plywood, four screws and a 90 degree bend is attached on the inner barrel side:I also sealed...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday