In case your exercise bike does not have sufficient buttons/touch pads to interact with the game, you can add buttons. In the below image I have added a joystick, a d-pad that also acts as XYAB buttons, and also LB and LT buttons which are housed in...
Now that you have fabricated each element of the fermenter, it is time to assemble it! Below you will find the assembly strategy. Gather the different elements and bring your Allen key and the bolts and nuts referred to above. Please also refer to the...
System’s Logic The system is designed with the following simple logic in mind: The system constantly monitors the distance between the sensor and the water surface.Whenever a change in distance goes over a threshold value, the system sends information...
This final part of the process will make sure the letter alignment is finely adjusted, and together with the correct imprinting pressure. « attention is needed here, please » reboot your E-TKT;after the splash screen the machine will...
Last week, I was trying to find some solutions to improve the cover of the detection area. To do this, I wanted to have a second sensor to test new configurations and speed. So I went back to the tip and I took several printer/scanner from different...
I modified two power strips. Once has the IR ToF sensor module (H08R60) to replace its power switch so that you can use hand gestures to turn on/off and the other one has a BLE and a USB modules so that you can control it via a smartphone or connect...
The next step is to attempt to recover the image. The image area in total is 48x48 monitor pixels. The 48x48 image is made up of a 24x24 image of interest, and a 12 pixel border of random values. Figure 15 Image of interest with random...
As I was saying, the multi-point cannot be perfect using a light triangulation technology with a CIS sensor. It is pretty complex to work on this part... But it is also very fun to imagine many different solutions on how to have the best results without...
Step 1 Get Parts Needed You can find all the necessary parts on eBay. Here are a few links; Pulse Sensor Amped Arduino Pro Micro 5v 16MHz SPDT Slide Switch - Through-Hole 3 Pin - Only needed if non-software mode switch is desired. Soldering Iron...
Assembly steps Printing and removing support material Fingers assembly Thumb assembly Inserting the motors on the palm Inserting the motor on the thumb Fingers and palm assembly Casting silicone in the molds Gluing the silicone “skin” in...
Go to AdafruitIO account or register (io.adafruit.com) if you do not have one. The account is free of charge with some limitations. However, for this project the free account is sufficient. > Create a Dashboard and name it e.g. MyHome > In...
Making the ModulesFirst cut the pref board in 5 X 3 cm dimension and solder the female headers for the arduino to the board.Then solder the buzzer.Then connect the vibrating motor using the glue gun and solder wires to it.Then connect the LED.Then connect...
In order to turn the remote control system on, an external switch was used. You can think of it as a button, except you don't need to press it, just hover something above it. It also works apart from the circuit triggered, which means it works as a wireless...
I used x axis data and y axis data from MPU6050 sensor to control servo motors and a WS2812B LED strip. - When the mapped value of the x-axis is positive and y-axis is positive The MIND STONE will light on/off and Pet Feeder will open/close. - When...