http://website.palette.io.s3-website-us-east-1.amazonaws.com/imprint.htmlImprintWhat you will needMolded Mouthguard (from Step 3) Air-Dry Clay Medium Power Heat GunWith the molded mouthguard from Step 3, we'll make a clay imprint of your top teeth. This...
Start by taking measurements from your donor laptop. I’m assuming you have already taken it apart, if not there are plenty of guides on YouTube, You should be able to find one for your laptop model. You’ll need to measure the height and width of the...
Set the motor mount retainer on top of the stepper motor and attach with 4 x M3 screws. Press-fit the 5 : 1 sun gear with the motor shaft axle to the stepper motor shaft. (note: the motor mount STL doesn't have the four holes in the plate right...
Next, we're going to start extending wires and mapping out where we want things to go. I like to add plenty of wire ahead of time and trim to fit as I go. Extend the wires coming from the power cord and solder the white and green to the proper sides...
For this project we use an open source Mosquitto MQTT broker. It is lightweight and is suitable for use on all devices from low power single board computers to full servers. Before we start installing, it's a good practice to update the system components...
Start by gluing together the screen mount and screen surrounds. You can always see how the parts go together in the FreeCAD model. Here you can see the 3 parts that make up the screen mount. All the other parts are hidden - by clicking on the eye...
The leading character of the device, the daisy wheel is responsible for embossing the letters into the tape. start by picking the device from the side, as indicated above;make sure the magnet on the I_nema_wheel_hub is facing the hall sensor,...
Constructing the system by following Motorola's Application Note 1015 will be sufficient, with the exception that the schematic is missing 2 external connections on the MC68901. One of the timer outputs TCO or TDO needs to be tied to TC (transmit clock),...
There are plenty of great designs out there, or you can even create your own. Designing your own 3D-printed Raspberry Pi cases can be a fun and rewarding experience. There are a few things to consider when designing your cases, such as the size and shape...
Once you have your design and material, it's time to start printing. You'll need to use a 3D printer, of course, and there are a few things you need to keep in mind. First, you'll need to make sure your printer is properly calibrated. Second, you'll...
1. Install Node JS (with npm). The process is quite intuitive and there are plenty of tutorials on how to make it2. Download the app here: https://github.com/ultimaterobotics/uECG_nodejs 3. Go to the app folder via command line. For this: - on...
Software quick-start:For the purpose of this guide, we’ll be using MotionEyeOS (formerly MotionPie) to create our Raspberry Pi Night Vision Camera, as it is very slick, purpose-built and well supported. First thing you’ll need to do is download the image...
Firstly Let us analyze the APA102, although it was more expensive than the common WS2812, and harder to come by, it had some intriguing properties. The main benefits are a timing-insensitive SPI interface, allowing easy interfacing to standard...
In this Tutorial from Hobbyware.org I will show you how to how to setup an RFID Reader on Windows IOT Core, from start to finish. Some of the things we will go over will be: Products to Purchase, Hooking up the RFID and Installing the OS, the code, and...
Explaining the codeWhy using VIPEROne of the concepts many people find challenging when beginning to write code for microcontrollers is how to manage multiple hardware-related tasks, seemingly all running at the same time. Designers are consequently...