819 Results for "≡ 예약문의 OIO《⑧④89》83ⓞ⑥ ≡선릉드림레깅스룸☜드림레깅스룸dreary강남드림레깅스룸선릉드림선릉드림레깅스룸distinct 강남드림㈓ゲ선릉드림레깅스룸선릉드림summit"

Laser Cut the Hot-plate Support Structure
Instructions from DIY USB-PD Powered MCH Automatic Reflow Hotplate
The hotplate support structure is a piece of 3mm MDF that is wrapped in Kapton tape. This prevent the MDF from smoking and turning black after long period of uses.

Assemble the Temperature Sensor Element
Instructions from DIY USB-PD Powered MCH Automatic Reflow Hotplate
The temperature sensor (glass bulb part only) is glue to the back of the MCH hot-plate with heat-sink adhesive. Note that there are a lot of S922 heat sink adhesive clone out there that cannot handle the temperature stated in its datasheet. So make sure...

Glue a piece of PVC on top of the display and screw the Arduino UNO
Instructions from Hacking a mircrowave

3 dimentionnal concepts
Instructions from Battle boat Game
To make the principal pieces of the boat, you have to use a 3 dimentionnal shapes maker ; for example Fusion 360 (which one we used for this project). To make these pieces on Fusion, you have to make an drawn plan containing circles, rectangles, lines......

Assembling the HDMI port
Instructions from RETRO 1 - Home Computer Console
Now that we have our power cable ready, we should have the parts in the photo below: Photo: Two 'halves' of the 3D printer holder, VGA to VGA cable, VGA-to-HDMI adapter and mini-USB to header cable. Insert the adapter into one piece of the holder and...

Assembling the PCB Holder
Instructions from RETRO 1 - Home Computer Console
Now get your PicoMiteVGA board and the two 'halves' of the PCB holder, as in the photo below: Starting with the larger piece of the PCB holder, GENTLY AND VERY CAREFULLY align and push the PCB into the shaped-slot. Note any resistance or catching...

Parts list
Instructions from Analog meter Arduino Clock
Magnets - each clock needs 8 https://www.amazon.com/gp/product/B097HBZ39T/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1 Rubber Bands https://www.amazon.com/dp/B07849G52M?psc=1&ref=ppx_yo2ov_dt_b_product_details Aligator clips (used to...

Third meeting
Instructions from Analog meter Arduino Clock
I recommend splitting the group up into two sections. A lot of prep work is required for this meeting. You need to have milled all the faceplates (hours and min), I made a couple of extras. The plywood boxes also need to be lasered...

Preparation
Instructions from Automatic Air Assist for 3018 CNC
Prepare all necessary components and tools. There are numerous ways to assemble this project, and the required components vary depending on your approach. For example, you can directly connect the pump to the controller using a pair of crimped wires,...

|<
<
53
54
55