197 Results for "3D printing"

ramanPi - Raman Spectrometer
Instructions from ramanPi - Raman Spectrometer
Below is a list of build instruction logs that will instruct you on how to go all the way from sourcing your components to printing the parts, and constructing your very own raman spectrometer!To begin, you will need some tools.. Pretty much every...

Tools and Materials
Instructions from DIY Wi-Fi Smart Scale (with ESP8266)
The following tools and materials were used in this project: Tools and materials: 3D printer (link). It was used for printing the case where the electronics are encloused.Solder iron and wire. Some of the components (ESP8266 Firebeetle and...

Tools and Materials
Instructions from DIY Smart Scale With Alarm Clock
The following tools and materials were used in this project: Tools and materials: 3D printer (link / link). It was used for printing the case where the electronics are encloused. Solder iron and wire. Some of the components (ESP8266 Firebeetle and LED...

Tools and Materials
Instructions from IoT Cat Litter Box (with ESP32 and Thingspeak)
The following tools and materials were used in this project: Tools and materials: 3D printer (link / link / link). It was used for printing the case where the electronics are encloused. PLA filament (link / link / link) of any color you want. Solder...

Flashing BlitzWolf BW-SHP6 15A / Pro
Instructions from Universal ESP-WiFi-device flasher
WARNING! As of autumn 2023 the new hardware version is internally completely different and doesn't have an ESP but something called "W701" that will probably be supported by OpenBeken at some point but currenty (Oct 2023) not. The W701 (apparently RTL8720)...

Building the Exposure Table
Instructions from QwickFab PCB
The workhorse of the QwickFab system is the exposure table used to expose photosensitive copper boards to UV light. Its major parts include: UV Light assembly replacement for Sparkmaker 3D MSLA printer5.5 Inch replacement LCD Screen with glass...

Step 1 Hardware Hook-Up
Instructions from Using the Arduino AccelStepper Library
Since our object is to drive an actual stepper motor with an Arduino, we'll need some hardware. Before we jump into the software, we need to connect our motor and driver to the Arduino. I'll also briefly discuss the driver and motor types and their strengths...

HueFidget Fob - a LED Fidget Keychain
Instructions from HueFidget Fob - a LED Fidget Keychain
Hello everyone! Keychains are small, seemingly insignificant items that hold keys. Keychains keep all your important keys in one place, preventing them from getting lost or misplaced. But normal keychains are boring, So I made an LED Fidget KeyChain....

Connect your Wires
Instructions from The Trash Printer - Version 3
1. Make the cable guide. Cut a 6-flute section out the 36" 10mm Corex sheet, and then make scores (not cuts) at 1" intervals, starting at one side, and moving inward 18". Use a razor blade and straight edge to make scores perpendicular to the flutes...

DigiPclock - a Digital Pocket Clock
Instructions from DigiPclock - a Digital Pocket Clock
Hello everyone! In this smart watch era, where people are forgetting about old watches, I decided to create a watch that is both digital and has a vintage look. So I created digiPclock. Buy this digiPclock from Tindie Store. By the way, subscribe to...

PULSE PACK Enclosure Build
Instructions from SHE BON
The PULSE PACK is a wearable computing platform that orchestrates a collection of body augments, all part of the SHE BON project. These augments are individual systems that sense and indicate when the user's body enters an "excited" state. Each system...

Pick-N-Place Wheel
Instructions from Pick-N-Place Wheel
Setting up and Using the Wheel In order to use the Pick-N-Place Wheel, you'll need to go through the first time setup process, this process involves: 3D printing and Assembling the wheel to suite your desired PCB project.Generating the required Files...

Build the hub including mechanics
Instructions from WinDIY - HAWT Wind turbine
At one point or another I have probably already mentioned that it was important to me to be able to control WinDIY safely and to be able to limit its speed in an emergency. This is why I developed a mechanism which allows to adjust the angle of attack...

3D Print
Instructions from Lamp Diffuser
All 3D settings are in Thingiverse. They are printed in a Lulzbot Taz 6 with Verbatim Primalloy in an Aeronstruder v1. Printed with the Ninjaflex Standard setting's profile from Cura LE (Except with Retraction off) Layer height: 0.3mm Wall Lines...

2.3 3D- printed box
Instructions from Interactive maps for visually impaired
We constructed 3d-printed box. We use some ready construction parts – battery boxes RUICHI 84*44*18 mm, only for versions with 6 AAA batteries as power supply. Battery boxes RUICHI 84*44*18 mm We used Anycubic Max4 3d printer with 210 x 210...

|<
<
1
2
3
4
5
>
>|