82 Results for "3D printing"

Building the SSD Bracket for Four SSDs
Instructions from Cluster Pi - Yet Another Pi Cluster Project
The small footprint and low height of the server chassis forced me to find a creative solution for vertically stacking 4 x 2 1/2 inch SSDs while having some sort of air flow between them. I search all over to find off the shelf brackets that would...

Planning for Chaos
Instructions from Temporal indicator: About every five minutes
Starting When I set out on this project, I was recovering from a killed project, a single servo-driven binary clock. I had just learned fusion 360 and jumped into a big project that was too much too fast. The Geneva Drive worked fine but there were too...

Bill of Materials
Instructions from The UV Budgie - A Fun IoT Alert For UV Solar Rays
3D Printing: 3D Printer (or able to print files via LINK below).White PLA Filament (832-0223) (+ 1 Alternative Colour, e.g. Yellow (832-0232)Printer Nozzles of 0.6mm, though 0.4mm will also be fine. Fixtures & Fittings: Brass Inserts -...

PULSE PACK Enclosure Build
Instructions from SHE BON
The PULSE PACK is a wearable computing platform that orchestrates a collection of body augments, all part of the SHE BON project. These augments are individual systems that sense and indicate when the user's body enters an "excited" state. Each system...

3D Printer Setup
Instructions from 3D Printed Vortex Particle Separator for Shop Vac
These settings (in Ultimaker Cura slicer) worked very well for me: Material:1.75mm PLA (roughly 600g worth!)I have an Anycubic Mega X printer. It has a print area capacity of 300mm x 300mm x 300mm. You will need at least 238mm (9.37")...

3D Tipping Bucket Rain Gauge and Calibration
Instructions from IoT Personal NodeMCU ESP12 WiFi Weather Station
Tipping bucket rain gauge 3D link >> https://www.thingiverse.com/thing:4519605 Mine 3d funnel diameter - 95mm 9.5cm ( radius 4.75cm) Funnel area S= pi *r2 = (3.14 * (4.75 *4.75)) = 70.88cm2 Mine syringe for calibration is 24mm. 24 ml give me 9 tips....

Step 2: 3D Printed Parts and Mounting the Electronics
Instructions from EMT Conduit-Mounted Wind Sensors
To mount the electronics to the EMT conduit, I designed several custom 3D-printed parts, all of which can be found for free to download from Thingiverse (links are below): 2 x Wind sensor mount 2 x 1/2" EMT conduit side-to-side clamp 1 x 1/2" EMT Solderless...

Prepare material
Instructions from BrailleRAP DIY Braille embosser
Put your hand on all the needed stuff and gear. The frame parts: Usually, we use 5mm plywood. But you can use any 5mm thick material that you can cut in a laser cutter, as acrylic PMMA for example. 3d printed parts : Print all 3d parts, it take...

'Slice' the model
Instructions from The moon upon its fourteenth night
I used IceSL-Slicer to 'slice' the 3d model into 1" thick flat pieces.

The Otter DIY Raman Spectrometer
Instructions from The Otter DIY Raman Spectrometer
Spectrograph geometry calculationsHere's a quick walk-through to calculate the geometry of the spectrograph. I guarantee nothing concerning the correctness of what follows (but please do correct me if you find errors). At the heart of everything is the...

Solder PMT socket
Instructions from DIY Scintillation Detector
Solder the socket on the other side of the PMT. Socket should come with the PMT. If you use the round PCB, the voltage divider won't fit in the 3D printed housing. I've designed that enclosure for 28mm diameter PMT tubes with the voltage divider soldered...

Print hull components
Instructions from small surface vessel
Print hull components using 3D-printer. (currently needed printer size: 300*250*450mm Recommended settings: 3 walls, nozzle diameter 0.6-1.2mm, Z-hop when retracted to avoid layer shift. Raft. Support. Cubic infill pattern. Print one component at a time,...

What you need
Instructions from Diving Goggles
For the inner flexible skirt: A resin 3D printer for the mold. I used a Formlab Form 3B+.Resin for the mold. I used Grey Pro.12 5x20 threaded screws to hold together the aluminium overmold10mm thick aluminium plates for the overmold. I bought 2 10x100x500...

Build the spool
Instructions from Nuclear Magnetic Resonance for Everyone
The dimensions of the spool are not critical. Larger or smaller spools should work similarly. An exact wire length is not important. Coils with more layers might perform better. This spool was designed to be as minimal as possible, to make it easy to...

Step 3: Create the Base
Instructions from DIY miniature Wacky Waving Inflatable Tube Guy
I designed the parts to be 3D Printed with CAD (Solidworks) and you can download them here. Parts were 3d printed with a Zortrax M200, but any filament-based machine will work. To assemble the parts, hot glue is used. A round metallic mesh was cut about...

|<
<
1
2
3
4
5
>
>|