Dupplicate HDMI output : you can then duplicate the HDMI output to that screen by downloading rpi-fbcp (https://github.com/tasanakorn/rpi-fbcp) :cd git clone https://github.com/tasanakorn/rpi-fbcp cd rpi-fbcp mkdir build cd build cmake .. makeYou can...
7. Connect the Arduino to your power supply + and ground. The NANO has a capable regulator so you can connect it directly to your 12V supply via the Vin pin. if you are using the custom PCB you can find them handily broken out at Vin :)
Software ConfigurationOnce you have the hardware complete, extract the package and open the 'newKey' sketch.In the Arduino IDE, edit this sketch and change the hex values for the newA and newB keys and for the tokenBlockData array. The keys are 6 bytes...
Vehicle MountingOnce it's set up, the last thing to do is install it on your bike. It can be hidden in the seat or for eBikes inside the battery box. (If your battery box is metal, you may need to futz with antenna and RFID reader placement to ensure...
UsageTo use simply power on once the unit is vehicle-mounted. The alarm is DISARMED when a provisioned key is in range of the reader and ARMED otherwise. Once ARMED, GPS is activated. If motion is sensed, the alarm sends a text message to the number...
1. Making The Transmitter : The transmitter module contain the various sensor for monitoring the weather.The DHT11 sensor is used for measuring temperature and humidity of the environment.It is good for 20-80% humidity readings with 5% accuracy and for...
Get 433utils: git clone git://github.com/ninjablocks/433Utils.git && cd 433Utils/RPi_utils && rm RFSniffer.cpp && wget https://raw.githubusercontent.com/Astu04/Raspi_PIR_Push_notif/master/RFSniffer.cpp && nano RFSniffer.cpp // We now modify the value...
Assemble the circuit, using the prototype PCB from my files or just a standard PCB. The connections are as follows: Setup: Arduino nano Bluetooth HC-05 Addressable 16 LED`s two rings NRF Module Pinout: Arduino Nano 5V: D9-->CE NRF D10-->CSN NRF D13 (SCK)-->SCK...
HARDWARE:1) Get one Arduino Nano (or clone). I used one with an ATmega328 chip. $2.49 from ebay. 2) Get one 4 Digit 7 Segment LED Clock Display. I used a 5462BS. A CL5642BH also works. I suspect that most of the ones with the colon in the middle have...
SoftwareSince the ODROID-W is fully compatible with all existing Raspberry Pi software packages, I performed all of the software configuration on a full-sized Raspberry Pi Model B, then removed the MicroSD card and installed it into the Mini PowerMac...
Configure Sound Output (Pi Zero only)If you're using any other kind of Pi, skip this step, a USB sound card is only needed if you're using the Pi Zero, which doesn't have an audio jack.Even with the Zero, you can avoid using a USB sound card by either...
First solder the headers onto your Arduino Nano board. Notice that I soldered the ICSP header onto the bottom since I'm using it to solder the serial lines of the LCD to.If your joystick and SD card breakout boards come with angled headers, like mine...
Screw the spacer onto the SD card board.Solder the Arduino and SD card breakout onto the perfboard. Notice their placement in the image. Solder the VCC (5v) and GND lines of the SD breakout board to the NanoComplete the data lines of the SD board:CS...