Close

120 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기た 《〈 문의 OIO↗5793↗7458 》〉 ⑷plenty㎋셔츠룸후기셔츠룸후기んteeth 셔츠룸후기선릉셔츠룸 강남셔츠룸￦셔츠룸ⓤsilverⓞ"

  • Lithium Battery Pack build
  • Instructions     from Rugged Solar Generator 2.5kW
  • Before starting a pack build yourself I would highly recommend you finish all of your ongoing projects that you can, because this will take a huge percentage of your focus. First a finished pack photo because I know many of you won't read to the end:...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Gantry Assembly 2 hoursThis is the estimated time it will take to assemble the Gantry.Step 1: Assemble the Gantry PlatesGather and lay out all of the parts. You will need:Two Gantry PlatesEight complete V-wheelsEight M5 x 30mm screwsEight M5 locknutsEight...

  • HP Touchpad Charging Wall Mount
  • Instructions     from HP Touchpad Charging Wall Mount
  • Stick the metal plate to the back, one plate for landscape and one for portrait, since the Touchstone supports charging in either orientation. Since my plates were already painted, I didn't want to cut them so they fit perfectly. This looked fine for...

  • The Beamboarder
  • Instructions     from The Beamboarder
  • Gently remove both plates with a lever. The first one will be easy and the second one is sometime attached with more screws from the back side of the HDD case. You also have to remove the read head with a screwdriver of the second one.

  • Real-Time Weather Dashboard
  • Instructions     from Real-Time Weather Dashboard
  • Set up your cloudBits if you haven’t done so already. Instructions for setting up the cloudBit can be found here.Assemble the case: Add a little glue to the edges of each plate (A­1 through A­6) and press fit them together. You’ll want to...

  • Insta-Ego Head
  • Instructions     from Insta-Ego Head
  • Set up your cloudBit if you haven’t done so already. Instructions for setting up the cloudBit can be found here. 2. Prepare the tilt valve: Unscrew the tilt valve from the tank. Carefully cut the black rubber nozzle off of the valve. Cut a piece...

  • 8-bit Jukebox
  • Instructions     from 8-bit Jukebox
  •      Assemble the case: Add a little glue to the edges of each plate (A-1 through A-5) and press fit them together. The arrows and letters on plates A-1 through A-4 should match up as shown in Image 1. You might want to use some...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Supporting InfrastructureFarmBot Tracks need to be attached to supporting infrastructure. Where you decide to install your FarmBot will determine how you setup your Tracks and therefor what supporting infrastructure you need. You might attach your track...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Assembly PreparationIn order to shorten the time it takes for you to assemble your FarmBot hardware, follow these preliminary steps. 15 minutesThis is the estimated time it will take for assembly preparation.Organize your PartsWhen you first open up...

  • FarmBot - Open-Source CNC Farming
  • Instructions     from FarmBot - Open-Source CNC Farming
  • Tracks Assembly 1 hourThis is the estimated time it will take to assemble the Tracks.Step 1: Attach the Track Plates What's your supporting infrastructure?Depending on your FarmBot's supporting infrastructure, you will do different steps to attach your...

  • Solar Water Pump
  • Instructions     from Solar Water Pump
  • In this step you will add 2 X 7ft I-beams on top of the two 11ft I-beams. You will also attach a 24.46ft C-channel to the I-beams. The procedure is specified in the layout diagram. If you do not wish to add an '11ft+7ft' I-beam design you can instead...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday