96 Results for "raspberry"

Desktop Arcade Machine : 3D Printed + RetroPie
Instructions from Desktop Arcade Machine : 3D Printed + RetroPie
3D print all the pieces. I used PLA for stiffness. All my 3D models were designed to be printed without the need for any support structures. You will need a 3D printer with a minimum print volume of 220mm x 220mm x 120mm in order to print these files....

DIY Self-monitored Smart Home for Vacation Time
Instructions from DIY Self-monitored Smart Home for Vacation Time
Step 1: REQUIRED COMPONENTSRaspberry Pi // ~$25-$3516 Gb SD card // ~$8Sound sensor // ~$2Old webcam // ~$0Old smartphone // ~$0WeMo Plug // ~$25OR RF socket + RF transceiver // ~$8/unit Optional: MicroBot Push button pusher // ~$49

DIY Smart Home Doorbell 2.0 (works with Alexa)
Instructions from DIY Smart Home Doorbell 2.0 (works with Alexa)
Step 1: REQUIRED COMPONENTSRaspberry Pi 2 or 3 // ~$25-$3516Gb SD card // ~$91 paper cup 1 sound sensor // ~$23 jumper wires Any speaker with AUX cableAn old webcam An old USB plug1 MicroBot Push // ~$49 ( link)Optional: Amazon Alexa and/or a smartphone...

Install Guts
Instructions from RPi 9000
Originally, I had a bunch of compartments, distancers and spacers precut to make the inside of the box a bit more tidy, but... I haven't really used them.I used a dishwashing sponge to keep the bluetooth speaker in place at the bottom, the lens was fit...

Fusion 360 Design and 3D Printing
Instructions from Pi Cam - A Remote Raspberry Pi Desktop/Camera/Serv
3D Print all the parts given Click For STL FilesYou can Modify The Design Model in Fusion 360 Software

Desktop Arcade Machine : 3D Printed + RetroPie
Instructions from Desktop Arcade Machine : 3D Printed + RetroPie
Display Issue FixThe first time you try to power up the full setup, make sure to power the display from a SEPARATE USB power supply FIRST, before turning on your RPi. The display needs to be active first, otherwise your RPi would not use HDMI for display....

Hardware
Instructions from Alertron
Well, there's nothing much to build on the hardware side. All you need is Raspberry Pi Zero W or WH - you need to solder 2x20 male headers if you get W, WH has them already soldered. Pimoroni's Unicorn pHAT comes with unsoldered 2x20 female headers,...

Overview
Instructions from Qwicktrace PCB
There are five phases to this project: Download the STL files and 3D print the caseMake the "Hat" PCB that sits on top of the Raspberry PiMake the custom wiresAssemble the unitConfigure the Raspberry Pi and install the UI control software A link to all...

Supplies
Instructions from Pi Cam - A Remote Raspberry Pi Desktop/Camera/Serv
1X Raspberry Pi 4 1X Raspberry Pi HQ Camera 1x 16mm Telephoto Lens or 6mm Wide-angle Lens 1x 5V Fan(50*50*15 mm) 12x M2.5 8mm & 5mm Screws 3D Printed Parts

Controller Board
Instructions from PCB Lamp Workshop
The Controller Board has a few important components and attributes to be aware of when designing your Lamp project. The Raspberry Pi Pico W board. This small but mighty development board has a RP2040 microcontroller and Wi-Fi connectivity. This...

Making the Hardware
Instructions from Intelligent Door Lock (Alexa & Face Recognition)
Raspberry Pi is connected with a camera module. Raspberry Pi sends data to Arduino using the serial cable. I short Arduino cable was used to connect Arduino with Raspberry Pi. Raspberry Pi & Arduino Connection Side view A test setup was made for primary...

The Haunted Fish Tank
Instructions from The Haunted Fish Tank
Place the glass sheet in the box. Insert the middle wood plate with the electronic. An old 5W Speaker and a 3,5W amplifier for the sound. I added a 10k potentiometer for the volume.Place the LCD on it. A little piece of breadboard with connectors to...

Build a box for the PI and the camera
Instructions from Rear view camera for electric wheelchair
Build a box which fits the raspberry pi and the camera. The box needs a hole on the side to route the USB power cable through and a hole for the camera which is large enough to not obstruct the view. I mounted the camera on a roughly 45° angle so...

Parts and Materials
Instructions from PrinterPi: Raspberry Pi Automatic Receipt Printer
The following parts and materials are required (as detailed in the Components section) Raspberry Pi Zero W with Raspbian Jessie Lite installed (this version is important if you want to make the file system read-only; see the optional last step)3D...

Configure the microphone
Instructions from Fast video doorbell / intercom on Raspberry Pi
Right click on the volume icon again, and then click on "USB Device Settings". Then click on the "Sound card" drop down menu, and select "USB PnP sound device". Click on "Select Controls...", and select both "Microphone" and "Auto Gain Control, then...

|<
<
1
2
3
4
5
>
>|