477 Results for "%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%9D%B4%EB%B2%A4%ED%8A%B8%E2%86%B2optime4%E3%80%82com%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC %EA%B0%95%EB%82%A8%EB%A7%88%EC%82%AC%EC%A7%80 %E2%86%B2 %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%E1%98%AE %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%83%9D%EA%B0%81%E1%98%AE %EA%B0%95%EB%82%A8%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B0%95%EB%82%A8%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

Connections
Instructions from TRICORDUINO - 3.0 True Scientific Tricorder
You can find every information about Feather MO Adalogger in: https://learn.adafruit.com/adafruit-feather-m0-adalogger/overview I have used all pins of Feather and I would like to have more pins available. These are the connections of the set: Pin00-...

July 7, 2023
Instructions from Geopolymer experiments
Begin with 200ml filtered water from the fridge tap, carried in an empty coffee pot. Using 4-6 ratio to calculate. 10x20 = 200ml H2O 4 grams sodium hydroxide x20 = 80 grams NaOH 6 grams silica x20 = 120 grams Unfortunately we only have 92.8 grams of...

Ai Weather Presenter #StephenHawking
Instructions from Ai Weather Presenter #StephenHawking
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Manual SMT Pick and Place Machine
Instructions from Manual SMT Pick and Place Machine
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Electro-Magnetic Enabled Bagpipes
Instructions from Electro-Magnetic Enabled Bagpipes
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

The NanoStillery™ - Whiskey Distillery
Instructions from The NanoStillery™ - Whiskey Distillery
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Arduino GPRS IOT Weather Station
Instructions from Arduino GPRS IOT Weather Station
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...

Raspberry Pi Zero Smart Glass
Instructions from Raspberry Pi Zero Smart Glass
On The Raspberry Pi Zero in Terminal and type these commands to install theRTL8723BU Wifi+Bluetooth 4.0 module (should take about 1 hour to compile)First Lets install the Wifi driverspi@raspberrypi:~ $ sudo apt-get install raspberrypi-kernel-headers...

Test with browser
Instructions from Control Infrared Mini-split AC with SmartThings
You can check Temp & Hum with IP address on your browser (port 80) You can control AC with your browser (port 81) Ex: 192.168.1.100:81

[OpenOCD] Go back to Linux Subsystem -> load program!
Instructions from RP2040 : Quick setup guide for Win10 and FT2232H
Go to your project build folder (example MyProject/build) and run GDB-multiarch:gdb-multiarch myProject.elf Then when you can log into it, enter this:target extended-remote localhost:3333 You will see this:GNU gdb (Ubuntu 8.1.1-0ubuntu1) 8.1.1...

Tools and Materials
Instructions from Joy Robot (Robô da Alegria) 2017 edition
The following tools and materials were used for this project: Tools: 3D printer - The whole body of the robot is 3D printed. Several hours of 3d printing were needed for building the whole structure;PLA filament - White and black PLA filaments...

Tools and Materials
Instructions from DIY Wi-Fi Smart Scale (with ESP8266)
The following tools and materials were used in this project: Tools and materials: 3D printer (link). It was used for printing the case where the electronics are encloused.Solder iron and wire. Some of the components (ESP8266 Firebeetle and...

Tools and Materials
Instructions from DIY Smart Scale With Alarm Clock
The following tools and materials were used in this project: Tools and materials: 3D printer (link / link). It was used for printing the case where the electronics are encloused. Solder iron and wire. Some of the components (ESP8266 Firebeetle and LED...

Front end assembly
Instructions from OSUG: Open-Source Underwater Glider
Place a single 608ZZ bearing in each of “Syringe_clamp_front” and “Syringe_clamp_back” On the “Syringe_clamp_back” secure the bearing in place with the “Engine_bearing_fastener” piece, 3 M3 20mm...

Simple digital watch
Instructions from Simple digital watch
Wiring the displayTo Wire the display you just need two wires for communication because it uses a I2C protocol and two for power so 4 in total. The two wires for the communication need to go to pin A4 and A5 and power to power. The wiring:A4 - SDAA5...

|<
<
8
9
10
11
12
>
>|