1621 Results for "%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EA%B0%95%EC%B6%94%E2%9C%9Awww%2Coptime4.com%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%20%EC%9D%B8%EC%B2%9C%EB%A7%88%EC%82%AC%EC%A7%80%20%E2%9C%9A%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%E1%98%9B%20%EC%9D%B8%EC%B2%9C%EC%98%A4%ED%94%BC%EC%82%AC%EC%A7%84%E1%98%9B%20%EC%9D%B8%EC%B2%9C%ED%9C%B4%EA%B2%8C%ED%85%94%20%EC%9D%B8%EC%B2%9C%ED%82%A4%EC%8A%A4%EB%B0%A9%20%ED%83%80%EC%9E%84"

Sending 'Hello' message to Cloud
Instructions from Golioth.io | IoT Platform Series #3 (Part 1)
From the directory golioth-zephyr-workspace/modules/lib/golioth, run the below command to build the firmware west build -b esp32 samples/hello -p Connect the ESP32 to the PC with the USB port. Now, let us flash the firmware to the hardware west flash...

Program
Instructions from Survey Rover
Extract the contents of the files. Copy the nRF905 library file to the Arduino library location.Open the project file for Rover using Arduino IDE. This contains the code for the Arduino Uno in the rover car.You can check and modify the transceiver...

Flashing
Instructions from Setup & Update the ESP8266 - Getting Started Guide
All the necessary documentation and tools for flashing the firmware on ESP8266 chips are available online, and much of it resides at the Espressif website. As I found it difficult for a newbie to get along on their website you can download the necessary...

SIMATIC IOT2000 with Node-RED
Instructions from Siemens SIMATIC IOT2000 to Ubidots + NodeRED
Before starting with the Node-RED flow, we must establish some configurations in the SIMATIC IOT2000. Please, follow the steps below carefully to ensure the right functionality: Package manager: Go to the opkg directory: cd /etc/opkg 2. Edit the...

Software Setup
Instructions from MQTT NOAH Baseboard
Intro: The most important part to get any electronics project you download from the internet up and running is the software tool chain. If you don't manage to get this set up it causes hours of frustration long before you get to the interesting part. ...

NEO8M configuration with u-center
Instructions from GNSS bluetooth module with u-blox NEO8N
To configure the u-blox NEO8N module you can hook it up via serial or USB. Here I connected it with the USB port and the device registred as COM5 on my PC. In Linux you may have to check the com port since wine generates all com ports new on startup....

Setting Up and Programming the Dial
Instructions from Ahmsville Dial V2
Select board as the Arduino Zero (Native USB Port) and select the COM-Port for the dial. Ahmsville Dial v2 - https://github.com/ahmsville/Ahmsville-Dial-V2 Magnetic Rotary Encoder - https://github.com/ahmsville/Magnetic_rotary_encoding Capacitive...

Testing Completing the Transmitter Receiver Pair
Instructions from DIY Radio Controller for Drone | nRF24L01
So as we are done with the Complete Setup of the Transmitter and the Hardware Setup of our Drone Receiver. Now we need to test the pair so for that we will follow the steps given below:- Head over to the Github repository of the project from here. In...

Super low cost VGA output for the Pi Zero
Instructions from Super low cost VGA output for the Pi Zero
SALVAGING CONNECTORSIf you have an old VGA cable (check with your local IT department, they probably have boxes of them) you can salvage the connectors. Start by pulling out the thumbscrews with pliers. Then use a hack saw to cut the ends off, but instead...

Pre Processing Original Image
Instructions from Automatic Reading Machine
Once the image is captured, the system applies a sequence of computer vision algorithms in order to improve the quality of the picture. The main objective here is to make the text in the image as evident and recognizable as possible, which is essential...

With the case and and device pieced together, we now need to connect with Arduino IDE
Instructions from Build a People Counter for $30 Using NodeMCU
To start, connect your NodeMCU to your computers port using the micro USB Note: If you do not already have the Arduino IDE, click here to download. 1.- Open the Arduino IDE, select Files -> Preferences. >Next input the following URL into the Additional...

PolaPi v2.0
Instructions from PolaPi v2.0
Rasbian Jessie Lite Pls download the latest version of Jessie Lite https://www.raspberrypi.org/downloads/raspbian/ write it to an SD Card (16GB recommended but 8GB would work too) boot your Pi, attach ethernet cable (or configure wifi) and enter the...

PhatStats PC Performance TFT Display
Instructions from PhatStats PC Performance TFT Display
PhatStats PC performance monitor & HardwareSerialMonitor Windows Client by Rupert Hirst and Colin Conway This project, assumes you have above average experience with Arduino, the IDE, compatible boards available...

thingSoC NEOLED Driver
Instructions from thingSoC NEOLED Driver
TSOC_NEOLED Arduino Sketch ExamplesUnder the "examples" directory are several Arduino IDE examples for using the TSOC_NEOLED board with Arduino IDE. Using the Arduino "Wire" library for I2C communications, it is simple to control the TSOC_NEOLED // Start...

CortanaRoom home automation
Instructions from CortanaRoom home automation
Step 4: Make the hardwareShow All ItemsNow we have the software part done we need to go to the hardware part.For the hardware we need 1 arduino uno or nano a lot of long wires! 3 mosfets i use the IRFZ44N 4 5V ( 12V is possible with extra circuitry)...

|<
<
103
104
105
106
107
>
>|