477 Results for "%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%9D%B4%EB%B2%A4%ED%8A%B8%E2%86%B2optime4%E3%80%82com%EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC %EA%B0%95%EB%82%A8%EB%A7%88%EC%82%AC%EC%A7%80 %E2%86%B2 %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%E1%98%AE %EA%B0%95%EB%82%A8%EC%98%A4%ED%94%BC%EC%83%9D%EA%B0%81%E1%98%AE %EA%B0%95%EB%82%A8%ED%9C%B4%EA%B2%8C%ED%85%94 %EA%B0%95%EB%82%A8%ED%82%A4%EC%8A%A4%EB%B0%A9 %ED%83%80%EC%9E%84"

Raspberry Pi Zero Prism
Instructions from Raspberry Pi Zero Prism
On The Raspberry Pi Zero in Terminal and type these commands to install theRTL8723BU Wifi+Bluetooth 4.0 module (should take about 1 hour to compile)First Lets install the Wifi driverspi@raspberrypi:~ $ sudo apt-get install raspberrypi-kernel-headers...

Prepare the CNC Files
Instructions from EnLIGHTen Web-Connected, OPEN source, LED Clock
The construction work of the CNC machine is pressing go on your CNC machine. But as anyone knows, CNC work is 95% setup and 5% cutting! A few words on setup are important here. First, getting a solid fixture is essential. I am choosing to hold down the...

Creating your first Windows 3.11 application
Instructions from Modern tools for Windows 3.11 software development
This will be a Win32s application, which requires Win32s addon on the Windows 3.11 (already pre-installed in the emulator).You can follow the video tutorial (part 05:47-08:54), or follow written instructions.Open the IDE by clicking runCodeBlocks.bat....

Code for single Esp32 Board
Instructions from Bluetooth Tracker
This is the code for everything on a single Esp32 Board. Since I didn't have the correct board, I needed to use two of them, and they communicate through the serial port.The Bluetooth packets address and raw data get printed to the Arduino Serial...

The Talking Microtronic Computer System Emulator
Instructions from The Talking Microtronic Computer System Emulator
Set up the hardware - the emulator main sketch shows the pin layout: // // SD+Ethernet Shield (optional) // #if defined (SDCARD) #define SDCARD_CHIP_SELECT 4 // // software serial interface for Emic 2 TTS module (optional) // #if defined (SPEECH) #define...

Clock in a Box
Instructions from Clock in a Box
In order to access A4 and A5 of the Arduino, you will need to solder two (2) headers onto the board (at least on my version). I used male right-angle headers to save space.

Mounting the ESP8266
Instructions from LG SJ2 Sound Bar hack
I use a Wemos ESP8266 board mounted on a small piece of veroboard to connect the ESP8266 to the relevant pins on the mainboard I2C connector. In my case I use GPIO12 and GPIO13 (SDA A4, SCL A5) for my interface.

Connect all hardware components
Instructions from Bottle pomodoro
Connect the accelerometer to the Arduino Mini VCC -> VCC GND -> GND SCL -> A5 SDA -> A4 Don't connect the battery, we will have to power up the Arduino Mini and upload the code first using an FTDI basic USB converter

Connections
Instructions from Autonomous Litter Detection Robot w/ Edge Impulse
// Connections // Raspberry Pi 4 : // L298N Motor Driver Module // GPIO 17 ----------------------- IN_1 // GPIO 27 ----------------------- IN_2 // GPIO 22 ----------------------- EN_A // GPIO 10 ----------------------- IN_3 // GPIO 9 -----------------------...

Print a Christmas tree
Instructions from Wooden Christmas tree with addressable LEDs
Search the internet for a nice looking Christmas tree and print it at the desired size (I used 2 pieces of A4 paper).

Attach pedal and buttons to arduino.
Instructions from Racing game
Use the negative points of the button and connect to the gnd pin of the arduino.Use the positive pin of the button to analog pins A3 and A4.Use the positive pin of the pedal to analog pin A2.

Assembly Code
Instructions from 8051 Alarm Clock
ROA EQU 7FH ;es Reloj o es Alarma USR EQU 50H ;Unidades de Segundos del Reloj DSR EQU 51H ;Decenas de Segundos del Reloj UMR EQU 52H ;Unidades de Minutos del Reloj DMR EQU 53H ;Decenas de Minutos del Reloj UHR EQU 54H ;Unidades de Horas del...

1. System Dynamics of the Ball Balancing Platform
Instructions from Adventures in state-space control, Arduino edition
Fortunately the dynamics of the table are not too complicated. Let the state, x, of the table include 2 variables, position and velocity, x and v. Given the relationship dx/dt = v, the state matrix equation is: The only way to control the position...

Build and flash the Libros firmware
Instructions from The Open Book
Support for the ESP32-S3 Open Book is very early at this time; there is no prebuilt firmware image, so you'll need to have both Visual Studio Code and PlatformIO installed. Download the Libros firmware from GitHub, open...

3. Peripherals Setup: TFT Display Control
Instructions from PiCon One
This step describes the TFT display setup for PiCon One. The TFT display I am using is the Adafruit 3.5 480x320 display with product ID 2050. The current pin assignment for this TFT on PiCon One v1.0a is matching the Adafruit 3.5 PiTFT (product ID 2097)....

|<
<
9
10
11
12
13
>
>|