Close

27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 강남몰디브ㄿ 《〈 문의 OIO↗5793↗7458 》〉 ㄻaudienceピ몰디브가라오케신사동몰디브шshop 신사동몰디브강남몰디브가라오케 강남몰디브ら신사동몰디브♩safely⒞"

  • Buttons
  • Instructions     from GPiA
  • Place the Buttons, Dpad, Shoulder button, etc in their places and add the rubber domes, lastly screw in the Button PCBs in and glue two tactile buttons bellow the triggers in their respective place:Lastly solder them to the PI not forgeting to not solder...

  • Last connections
  • Instructions     from GPiA
  • Lastly connect the Caharger Module to the battery the usb charging port and through the power switch to the Pi

  • PCB Design
  • Instructions     from Power Monitoring for your Mobile Home
  • The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used.  The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

  • Software
  • Instructions     from Power Monitoring for your Mobile Home
  • As I mentioned in the project description, the point of this project was because I wanted the finished device to use. I wasn't planning to to anything technically ambitious so I just put some code together using the Arduino IDE and shamelessly took advantage...

  • Cell Phone App
  • Instructions     from Power Monitoring for your Mobile Home
  • I built a cell phone app to complement this project as I feel that we are entering an age when everyone expects their electronics to seamlessly connect to their phone. A cell phone app offers convenient access to real-time electricity data...

  • Construct the inside of the box
  • Instructions     from M8B 2.0
  • Create a ground with spaces/holes specifically adapted to each component with a 3D modeling tool so that the components don't move when shaking the ball3D print itPlace it inside of the box, make sure to attach it so it doesn't move

  • How to install the bash prompt
  • Instructions     from Beautify Your Bash Prompt
  • Check for Existing .bash_prompt:First, you need to check if there's already a .bash_prompt file in your home directory. Execute the following command: ls ~ -a | grep .bash_prompt Rename Existing '.bash_prompt': If you find an existing .bash_prompt and...

  • Preparation
  • Instructions     from Automatic Air Assist for 3018 CNC
  • Prepare all necessary components and tools. There are numerous ways to assemble this project, and the required components vary depending on your approach. For example, you can directly connect the pump to the controller using a pair of crimped wires,...

  • Making a PCB
  • Instructions     from Automatic Air Assist for 3018 CNC
  • This is the V1 of the controller, having two outputs. Later I decided to leave only one. While you could opt for point-to-point connections, utilizing a Printed Circuit Board (PCB) offers a more reliable method for assembling the electronics. For those...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday