Close

854 Results for "%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%E3%80%8Eoio_%EF%BC%94%EF%BC%96%EF%BC%94%EF%BC%98_%EF%BC%90%EF%BC%99%EF%BC%93%EF%BC%90%E3%80%8F%3E %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8 %E2%88%88%EC%84%A0%EB%A6%89%EC%9C%A0%ED%9D%A5 %E2%88%83%EC%84%A0%EB%A6%89%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%8F%EA%B0%95%EB%82%A8%EB%A3%B8%C2%B1 %EA%B0%95%EB%82%A8%EC%9C%A0%ED%9D%A5 %E2%88%91%EA%B0%95%EB%82%A8%EB%A3%B8%EC%8B%B8%EB%A1%B1 %EA%B0%95%EB%82%A8%EB%9E%80%EC%A0%9C%EB%A6%AC %E2%88%80%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%2B %EC%84%A0%EB%A6%89%EB%A3%B8%EC%8B%B8%EB%A1%B1%E2%88%86 employee"

  • Step 1: 3D printing
  • Instructions     from UltraTower
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Step 1: 3D printing
  • Instructions     from UltraTower 2023
  • To build a tower you will need to print the 3D parts shown on the left of the image. The "Sensors float" part is optional, print it if you want to use the pH and EC sensors. You will need 12 times the part: "Basket".  You can download the files...

  • Connect to Arduino
  • Instructions     from 4-Channel Optogenetics Pulser
  • Plug the collated ground wires into an Arduino Ground pin, and the collated +5V wires into a +5V pin (if using a Due, use the +3.3V pin or you will damage the microcontroller) and plug the other jumper wires into the correct I/O pins: Toggle switches...

  • I2C Sensors and debugging
  • Instructions     from Stratux ADSB Receiver and AHRS
  • I wanted to use a BMP280 I had in my parts bin for altitude measurements. I have used it in the past for a simple weather station and it works great! Turns out, it is even the go to sensor for Stratux, so I went ahead and plugged it in, activated it...

  • Cabling the MPE device's hardware-components
  • Instructions     from MPE-DIY-Device
  • Power supply: Ground - GND from Teensy (power-rail as described in the PDF attached) +3.3V - 3.3V from Teensy (power-rail as described in the PDF attached) Joystick 1: VRx - Pin 23/A9 (horizontal control) VRy - Pin 22/A8 (vertical control) SW - Pin 01...

  • DIY Data Logger
  • Instructions     from DIY Data Logger
  • Here's the code for the Spark Core. The programming for this is very similar to an Arduino. Once you go to the Spark website and get your Core setup you just click on the BUILD tab, create a new App and paste in the code and it'll upload the code over...

  • Prep Your Board!
  • Instructions     from Sotto: A Silent One-Handed Modular Keyset
  • Cut your protoboard to roughly fit the size of the Feather. Use your wires to take the inconveniently placed pins and turn them into tidy little rows of four. The rows should be: A0   3v   Gnd   11 A1    3v ...

  • Program
  • Instructions     from Hybrid Sim Yoke
  • Add the library https://github.com/MHeironimus/ArduinoJoystickLibrary to your Arduino environment. Load the following code onto the Arduino (adapted from the excellent article at https://giovannimedici.wordpress.com/2020/10/11/ch-pro-pedals-gameport-to-usb-adapter/ ):...

  • Run a Program
  • Instructions     from Analog Speedometer Using Arduino and IR Sensor
  • #includeLiquidCrystal lcd(A5,A4,A3,A2,A1,A0);#include const int stepsPerRevolution = 200; // change this to fit the number of steps per revolutionStepper myStepper(stepsPerRevolution, 8, 9, 10, 11);volatile byte REV; unsigned long int rpm,RPM;unsigned...

  • Connections

  • Instructions     from TRICORDUINO - 3.0 True Scientific Tricorder
  • You can find every information about Feather MO Adalogger in: https://learn.adafruit.com/adafruit-feather-m0-adalogger/overview I have used all pins of Feather and I would like to have more pins available. These are the connections of the set: Pin00-...

  • EDID Inserter
  • Instructions     from EDID Inserter
  • Plug in the freshly minted EDID Inserter and a repeated invocation of the following should yield only 256 FFs typical of an EEPROM fresh from the factory:sudo i2cdump 3 0x50Dire admonitions are issued even when merely trying to read:No size specified...

By using our website and services, you expressly agree to the placement of our performance, functionality, and advertising cookies. Learn More