27106 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

Knowhere
Instructions from Knowhere
Type this into your RasPi Terminal to download the transmission code. This isn't ours, I must credit the original makers of the RasPi radio, Icrobotics.wget www.icrobotics.co.uk/wiki/images/c/c3/Pifm.tar.gzThen type Isthentar -xvf Pifm.tar.gzAlso,...

Briefcase PC
Instructions from Briefcase PC
Additional acrylic work.I worked on mounting the power and reset buttons, and cathode light switches next.I drilled holes for the power and reset buttons and used a dremel for the cathode light switches. I had to cut up some metal scraps to help hold...

Sweet Dreams CNC (multimachine)
Instructions from Sweet Dreams CNC (multimachine)
Some unsolicited but practical advice if you are thinking of designing and building your own CNC;You wont know all the answers before you start, you wont even know all the questions. Start anyway it'll be the most satisfying thing you ever build.Just...

IFTTT Button
Instructions from IFTTT Button
Check the software for bugs and improve it if you think it's necessary. Maybe you want to add new features. Anyway, it's a good idea to test it on a breadboard before you start soldering. You can find the software I used for this project here. I modified...

piHole - Raspberry Pi text-to-speech msg server
Instructions from piHole - Raspberry Pi text-to-speech msg server
SummaryAnd that's it!I hope this simple project gives you some new tools to play with and inspires swarms of talking projects. For my own part, I'll probably port piHole to an existing (non-Pi) Linux server that's sitting in my living room anyway. But...

Add Required Support Hardware for UBW32 (if you are using that board)
Instructions from TRS-80 Model 1 on a PIC32
get a UBW32-MCC for the jacks. assemble it. It's a fairly simple board. I do highly recommend buying a CR1616 solder tab (search 'gameboy' on ebay) battery that you can wrap in electrical tape and stuff underneath the mounted UBW32. Anyway, you'll need...

Extend that USB
Instructions from I'm Building an ErgoDox!
The ErgoDox (the one I built, anyway) has the Teensy set perpendicularly to the case, so the mini-USB has to be extended from the Teensy to the edge with an exposed male that gets wired to the board.If you wire up your own extender from a kit, verify...

HX711 Noise
Instructions from LoRaWAN Birdhouse
The HX711 in the birdhouse uses the 3.3 V supplied by the Grasshopper both as analog and digital supply voltage for the ADC. The SparkFun board is designed for AVDD = 5 V analog voltage. To use the internal analog supply regulator with AVDD...

3D printing
Instructions from Keymu - open source keychain-sized gaming console
The STL files are available on Thingiverse or directly from the project files. These STL files are for 3D printing or visualization, if you feel like modifying the 3D design and missed Log#4, don't worry: all the Solidworks source...

Portable LED Floodlight
Instructions from Portable LED Floodlight
Ok, the next part selection can fairly important depending on your taste, but in a pinch you could use anything. I've found this to be one of the best:It's a seasonal though so good luck.OK anyway, Digikey has a free online schematic drawing tool. I...

Send serial to Comtrol Devicemaster with Arduino
Instructions from Send serial to Comtrol Devicemaster with Arduino
OH, something that I found out the hard way...The MAC address of the ethernet shield had to be different for each box. I did not know this going in, and used the same MAC in each deployed unit. Noted that disconnects were shutting down all connected...

Two-handed chording keyboard
Instructions from Two-handed chording keyboard
Assemble materials. If possible, try the mechanical switches to suit your hands. I used the Cherry MX Clear for all buttons. Perhaps, MX Blue would be better for Alt, Control, and Shift. Anyway, for the top boards you need "Tactile", and for the bottom...

Finish Enclosure
Instructions from Stack Light Monitor
Sand the outside of the enclosure as desired to create a more finished, smooth look. I used up to 2000 grit sandpaper and the results were very nice. Don't worry about the inside since it won't be visible anyway.Use a 2.5mm (3/32" if you...

Step 4: Install the Pump
Instructions from Automatic Alcohol Dispenser With Arduino
The pump is mini type, 5VDC power supply (its power also small). The pipe is connected to pump, then all of them is put into a bottle. This project is used alcohol for cleaning hand. Some of my friends tell me that alcohol is easy catch fire! At beginning...

vjoyserialfeeder setup
Instructions from 4 joystick (6-axis 6-dof) game controller
The setup for vjoyserialfeeder is pretty easy. I have also uploaded my configuration json, but if your pins are not in the same order as mine, then your axis and buttons will not have the same number order. This doesn't matter though, because you...

|<
<
1
2
3
4
5
>
>|