420 Results for "%E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%D1%86 %E3%80%8A%EB%AC%B8%EC%9D%98 OIO-5793-7458%E3%80%8B %E3%83%8Bjim%E3%85%99the33%EC%85%94%EC%B8%A0%EB%A3%B8%EC%84%A0%EB%A6%89%EB%A0%88%EA%B9%85%EC%8A%A4%EB%A3%B8%C4%B8fire the33%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%84%A0%EB%A6%89the33 the33%EB%9E%80%EC%A0%9C%EB%A6%AC%EB%A3%B8%E3%82%A1%EA%B0%95%EB%82%A8the33%E3%8E%8Fpointed%E3%83%A9"

Use CoilCalc to characterize an existing coil
Instructions from Inductance design tools
# # Example coil: Diameter 50mm, Length 200mm, with 35 turns # > CoilCalc --D=50 --l=200 --N=35 --d=1.44 --f=13.562 # QOIL™ — https://hamwaves.com/qoil/ — v20181217 # Coil design 2023-03-11 12:20 # INPUT # mean diameter of the coil D = 50.0 mm # number...

DIY electrically heated sauna
Instructions from DIY electrically heated sauna
I've bought this countdown timer from ebay for £17:90-260V AC/DC Dual 4 Digits LED Timer Countdown Time Counter 1 Alarm Relay S3G8http://www.ebay.co.uk/itm/141886695028?_trksid=p2057872.m2749.l2649&ssPageName=STRK:MEBIDX:ITI could have bought a...

DIY Self-monitored Smart Home for Vacation Time
Instructions from DIY Self-monitored Smart Home for Vacation Time
Step 7: MAKE YOUR HVAC APPLIANCE SMARTTo allow you to come back into a warm house during the winter or a chilled one during summer without having a crazy energy bill due to HVAC appliances left on during, smart appliances can hopefully be triggered remotely....

Testing the gesture-controlled power strip!
Instructions from Fancy Power Strip
I loaded standard H0FR60 firmware on the relay module. Check latest release here in the Compiled folder. For the IR module (H08R60), I made this simple code (attached project) that detects a hand sweep within 500mm range. The FrontEndTask simple...

Electric wiring/soldering (Part 2: the LED)
Instructions from Retro Slide Projector "Green-Edition"
Now it's time to solder the LED (or more accurate a Chip-on-Board, I will refer to it as COB).At first, take the adhesive glue and glue the COB onto the heat spreader at the position you have marked earlier. Wait some time (an hour or more) for the glue...

Looking at the Relay Module
Instructions from Control Home Appliances through Alexa with ESP8266
The Relay Module is a convenient board which can be used to control high voltage, high current loads such as lamps and AC load. It is designed to interface with a microcontroller such as Arduino, ESP8266 and etc. It comes with a LED to indicate the status...

DIY Home Automation System
Instructions from DIY Home Automation System
The Hardware The main component of this build is a simple relay board that can be used to switch voltages up to 250V AC and a maximum current of 10 amperes: A simple relay board for higher voltage projects. It’ll be controlled by an ESP8266 based IoT...

Building your H-Field Probes
Instructions from Remoticon: Basics of RF Emissions Debugging
For this project, we're going to focus on H-field probing, since it tends to offer excellent sensitivity and resolution, and building acceptable and useful H probes I think is easier than building acceptable E field probes. But wait, H field vs E field?...

Gather materials
Instructions from STARTEC REGISTRO
First things first, get your hands on what we need for this project. Project Components are listed in the components section, but if you're based in the Philippines, a Bill of Materials of our purchases for this project is provided in the files section....

Things you will need
Instructions from Modular PSU & Soldering station
Bill of materials(quantity depends on your configuration): Enclosure DPS3003/5 DualDPS3005 PSU moduleMeanwell LRS-100-24Front panel DPS3003/5 or T12 Soldering stationAS-10[IEC320 C14] SocketBS-244DSM-R Red 4mm banana socketBS-244DSM-B Black 4mm banana...

Circuit Assembly
Instructions from Force Induced Sabre Torch
The circuit (AC to DC converter and Booster), is assembled on Stripboard of sufficient size to fit within a 18mm wide by 100mm long tube. Most of the components on the board are polarised (with the exception of the switch, resistor and generator coil),...

Previously made Hotplate Project
Instructions from Makeshift Reflow Hotplate
This was the previous Hotplate project, which expanded the heating area by connecting the cloth iron's element to a copper plate. A mechanical mechanism called a thermostat was used to control the heating element of the original version of the hotplate....

Part 1 - The PCB
Instructions from NOOBIX IOT
What’s up my friends, welcome back. This below is the PCB that I’ve designed for my project. I’ve tried to make it as small as I could so it could fit inside of a basic wall electric box. This project works at 220V so make sure you stay safe and...

Arduino based - Air Source Heat Pump
Instructions from Arduino based - Air Source Heat Pump
Build your own "brain" transplantAll source code and Fritzig scheme of circuit is available here on GitHub:https://github.com/evaldsurtans/heat-pump-arduino-...Robot "eye"In order to detect ice buildup, I used an idea from line follower robots that have...

E Stop Wiring
Instructions from CNC retrofit with a Buildbotics CNC Controller
The Dyna comes with an E Stop switch that is connected in line with the input AC. As a result, no additional E Stop switch was necessary for this retrofit. If you want to connect another E-Stop switch, simply connect the E Stop switch to ground...

|<
<
24
25
26
27
28
>
>|