218 Results for "%E3%80%8A%E3%80%88 %EB%AC%B8%EC%9D%98 OIO%E2%86%975793%E2%86%977458 %E3%80%8B%E3%80%89 %EA%B0%95%EB%82%A8%EC%85%94%EC%B8%A0%EB%A3%B8%E3%81%A3 %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9conspicuous%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0%EC%84%A0%EB%A6%89%EC%85%94%EC%B8%A0%EB%A3%B8%EC%85%94%EC%B8%A0%EB%A3%B8solid %EC%85%94%EC%B8%A0%EB%A3%B8%EA%B0%80%EA%B2%A9%E2%94%82%C3%86%EC%85%94%EC%B8%A0%EB%A3%B8%ED%9B%84%EA%B8%B0derivative"

Step 13
Instructions from Easy Diy Pencil Holder
Choose one object. Use Move tool to transfer it to center and set value 80 on Z axis, also transfer to center another object

Instalar brazo MK2 en la base
Instructions from MKlap2: Pick and place with MK2 arm
De forma paralela a la banda, alejado con respecto a su centro y el borde de la banda a 80 [mm] y con sus perforaciones traseras en línea con la de fijación de la banda.

PCB Design
Instructions from Power Monitoring for your Mobile Home
The PCB design is really just a motherboard to link the various breakout boards I used to the ESP-32 wroom dev board I used. The PCB is powered by by the electrical hook-up and comes on everytime the hook-up is connected and powered up. For this...

Sigma Derby Clone
Instructions from Sigma Derby Clone
Programming the finish switch Mega board)The finish switch Mega board will be the brains of the operation. It will come up with a 5 digit number to Serial communicate to the other boards. The 5 digit number will contain 3 pieces of information. The first...

July 7, 2023
Instructions from Geopolymer experiments
Begin with 200ml filtered water from the fridge tap, carried in an empty coffee pot. Using 4-6 ratio to calculate. 10x20 = 200ml H2O 4 grams sodium hydroxide x20 = 80 grams NaOH 6 grams silica x20 = 120 grams Unfortunately we only have 92.8 grams of...

Get a microSD card
Instructions from TRS-80 Model 1 on a PIC32
get a 2 GB microSD, FAT formatted. (I think 2 GB is the max the driver will support; haven't tested with larger. Anyway, I suspect 2GB might be able to hold all the software ever written for the TRS-80, ever. UPDATE: it works with up to 32...

Working with the Medium Machinery Injection Molder
Instructions from Working with the Medium Machinery Injection Molder
Hardware:Medium Machiney Benchtop Injection Molder; 5CFM+ Air Compressor (Harbor Freight 10Gal, 2.5 Horsepower, $130) {plus adapters & fittings} ; Toaster Oven ($80); kitchen gram/oz scale; stop watch; Tools:channel-lock & needle-nose pliers, diagonal...

Step 10
Instructions from DIY Decorative lamp | Home Decor Ideas
Move camera under model and select Bottom Polygons with Right Mouse Button Then select Move Tool and set Y to 50 Select exactly the Foundation copy Then open Scale Tool and set X and Z to 80

Sigma Derby Clone
Instructions from Sigma Derby Clone
Program the betting station)The betting station needs to know the odds of the current race to know what to pay out if you win. It also needs to know the race winner.Once again this is the fun version, so there is no code here for coin in, or cash out.#include...

Configure LoRa device
Instructions from Soil moisture sensor with LoRa
In HTerm or any other terminal program you see the start of the module after plugging the power supply jumper.Now you can configure the SMT100 by entering the password in HTerm (123456) and then send AT commands (Attention: Always capitalize commands...

Code for single Esp32 Board
Instructions from Bluetooth Tracker
This is the code for everything on a single Esp32 Board. Since I didn't have the correct board, I needed to use two of them, and they communicate through the serial port.The Bluetooth packets address and raw data get printed to the Arduino Serial...

MINI-Zee: a $100 DIY smart drone with the Pi Zero
Instructions from MINI-Zee: a $100 DIY smart drone with the Pi Zero
Bill of Material (US$ - Transport & taxes excl.):Raspberry Pi Zero 5.MPU 9205 (SPI 9 dof IMU) 8.MS 5611 (SPI Baro) 9.PCA 9685 (16 channel PWM Servo Driver) 5. 3.3 v. regulator 1.BEC 3 amps 3.Breadboard, Resistors, Connectors, Misc. 7. AutoPilot: 38.HobbyKing...

Voices of the past, speak up!
Instructions from Voices of the past, speak up!
You will need the text to speech board from Mikroelektronika: https://www.mikroe.com/text-to-speech-click Don’t forget to jumper it for 5 V! By default it is set of 3.3 V! You can solder it in directly, but make sure you have enough clearance for the...

How to use your Milight lights with Google Home.
Instructions from How to use your Milight lights with Google Home.
Add your Milight lights to the ha-bridge software Open up the ha-bridge software in your browser (http://raspberry-pi-IP-address:80/), it runs on port 80 by default.You'll see a list of bridge devices, click add.Set a name and description to your likings....

Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Instructions from Cheap-dirty-perfect V-Groove Foam Cutter / Bender
Cleanly sand the bottom side (or not)You want the tool to slide nicely on the foam. The best solution is to sand the bottom side with 80, 120, 180, 240, 260 and 500 grit sand paper. You could also apply a varnish. But this is a quick build. Put some...

|<
<
2
3
4
5
6
>
>|