License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...
License:Creative Commons Attribution-ShareAlike 4.0 International Public LicenseBy exercising the Licensed Rights (defined below), You accept and agree to be bound by the terms and conditions of this Creative Commons Attribution-ShareAlike 4.0 International...
ROA EQU 7FH ;es Reloj o es Alarma USR EQU 50H ;Unidades de Segundos del Reloj DSR EQU 51H ;Decenas de Segundos del Reloj UMR EQU 52H ;Unidades de Minutos del Reloj DMR EQU 53H ;Decenas de Minutos del Reloj UHR EQU 54H ;Unidades de Horas del...
If repurposing this board for your own projects, make sure of your pin connections before ordering the boards. You may notice an air wire in the photos: I routed the bottom LED originally from A6, which it turns out is not addressable as an output.
Programming instructions:Load the Arduino sketch in the Arduino IDE on your PC.Connect your PC to the mini-USB port of the Arduino Nano. Note that you do not need to remove the Arduino Nano from the PCB. It does not matter if power is applied to the...
I went for 2x3U. I screwed a piece of roofing battens into the case and the bottom rail directly onto them. The middle rails are just screwed together and are laid onto some standoff I laser cutted out of some scrap wood. The top rail...
Tools All you gonna need is soldering iron, solder, and pliers. Frame First of all select some pattern. I choose a nice and simple snowflake crystal and print it to the size to fit Arduino Nano inside the hexagon - core of the crystal. The support structure...
Installation instructions:Connect the gate "CLOSE" and "OPEN" wires to J1. It is assumed that the gate controller expects an open-collector connection. For any other type of connection, J1 may be used to drive a pair of relays which are connected to...
In order to decode the 23 bytes of payload that the sensor is sending we need to implement a decoder, in this case we need to create one custom. Once you select to create a custom decoder you just simply copy and paste the next code which is written...
The SR latch modified with the inverter is often called a D latch because the single input is data for the latch to store. To make it a D flip flop, though, you need to arrange to capture the data at a clock edge, not just any time the latch is enabled....
If all went well, the synth should now respond to CC messages received on the MIDI IN socket, and the display will show the values changing.Look in the source to see which CCs are mapped to which parameters. I've tried to chose sensible values, but YMMV,...
Next thing was the PSU. Since I had a spare NiftyCase laying around, and they have a PSU / MIDI In and Audio Out already in the case, I decided to just canibalize this. The NiftyCase electronics consists of two PCBs, connected with a ribon cable. I laser...
#include #ifdef __AVR__ #include #endif // Which pin on the Arduino is connected to the NeoPixels? // On a Trinket or Gemma we suggest changing this to 1 #define PIN 6 // How many NeoPixels are attached to the Arduino? #define NUMPIXELS 48 // How much...