4801 Results for "%s"

small micro speakers with a rich soundstage
Instructions from small micro speakers with a rich soundstage
mount the tweeter on the inside of the enclosure, it should be a snuggly fit. if it's too loose, add some sealing tape. if it's too tight, sand some out of the tweeter hole

Like and Follow.......Stay tuned!
Instructions from PROJECT GUERRILLA
Let me know there's an interest here! And there's going to be lots going on, so keep watching!

Add Your Flare
Instructions from A Handle on Life – Broken Drawer Handle Fix
Decorate the functional piece as you choose! It's going to be visible, so make it as extreme (or minimal) as you want! (So long as it's still functional).

Place electrodes where voice muscles are
Instructions from Cerebro Voice
Concentrate around the throat area and Adam's apple but do not put pressure directly on Adam's apple

High side drivers (current sources)
Instructions from FPGA Blinker
Repeat 8 times: take a BS250P PMOS and solder the S, G and D pins to the board (S to the Vcc bus) and a 10K resistor between the G and the S (or the Vcc bus). Let's label the Gs and Ds (G'0, D'0), ..., (G'7, D'7), respectively. Take a BS170 NMOS and...

Test
Instructions from Solar Powered Torch
Hopefully it's sunny. Point it at the sun. Does the sun suddenly get a little brighter? Congrats, you've successfully helped brighten someone's day.

Step 3:
Instructions from A 'smart' controller for a powered chair or bed
Plug this device’s pig-tailed MALE 5-pin DIN plug into where you unplugged your chair's button array from in step 1.

niftyled
Instructions from niftyled
s. http://wiki.niftylight.de/Quickstart for quick instructions on setting up niftyled and doing first steps...

ZRTP Hardphone
Instructions from ZRTP Hardphone
### [ TESTING SOUNDCARDS ]# Testing the internal soundcard with headphones:speaker-test -c 2 -s 1 -t wav -w /usr/share/sounds/alsa/Front_Left.wavspeaker-test -c 2 -s 2 -t wav -w /usr/share/sounds/alsa/Front_Right.wav# Testing the USB soundcard with headphones:speaker-test...

control of bot using bluetooth module
Instructions from control of bot using bluetooth module
that it's friends your project is done!!hope u liked it.

RetroBerry: a Raspberry Pi 2 Portable
Instructions from RetroBerry: a Raspberry Pi 2 Portable
Extrude into 3D. OpenSCAD is your friend-as well as [dnewman]'s Inkscape->OpenSCAD script.

RetroBerry: a Raspberry Pi 2 Portable
Instructions from RetroBerry: a Raspberry Pi 2 Portable
Screw the joystick(s) and triggers to the back of the case and solder ribbon cable to them.

IFTTT Button
Instructions from IFTTT Button
Now it's time to flash the ESP-01 and upload the software from step 1.

i♥Me4e
Instructions from i♥Me4e
And what's not yet done ( hence the "vegetable pluche" statement ): the firmware :)

BATHAT
Instructions from BATHAT
Connect the ultrasonic sensors to the Arduino Uno's Pins as shown in the schematic diagram

|<
<
2
3
4
5
6
>
>|