Close

267 Results for "G 골드피쉬카지노 cddc7닷컴 ♣보너스코드 b77♣정선파워볼༸바카라숫자흐름ɡ로하이픽🔟온카월드∮골드피쉬카지노이곳 siegfriedline/"

  • ledkt_v1
  • Instructions     from ledkt_v1
  • Attach a 4 pin 0.1" female header to the input side of your 12V 5050 RGB LED strip, with any necssary wiring in-between. Pin order is from left to right: 12V, G, R, B. Refer to this image set for an example. The device is only able to output color to...

  • Mocoder - Magnetic Encoder
  • Instructions     from Mocoder - Magnetic Encoder
  • Solder leads to the circuit.Solder leads to G (ground), 5 (5 Volts), D (SDA), C (SCL). Length depends on application, but a foot is good place to start.If they are stiff wires, then bend them up away from the board.

  • Write the sequence you want to automate
  • Instructions     from Netflix automated log in
  • Once you decode the necessary buttons, arrows and OK button in my case, you can program how to "navigate" the keyboard.The keyboard starts at "g", it is as simple as 3 times right button and OK for pressing a "k". With this logic you can enter your complete...

  • Add Compiler Dev Tools
  • Instructions     from Stepmania 5 compile for ARM (Jetson TK1)
  • sudo apt-get install cmake gcc g++ libmad0-dev libgtk2.0-dev binutils-dev git-core make libasound2-dev yasm libc6-dev libogg-dev libvorbis-dev libbz2-dev zlib1g-dev libjpeg62-turbo-dev libpng12-0 libxtst-dev libxrandr-dev libglew-dev libglu1-mesa-dev...

  • Slice the models
  • Instructions     from Embedding a mesh into 3D print
  • Save both files as separate STL files, then slice each one and save the g-code.  I used Cura for the slicing and the preview mode to figure where to modify the g-code. In the preview mode in Cura, move up the the layers until the channel is just...

  • 3D print instructions
  • Instructions     from PionEar: Making Roads Safer for Deaf Drivers
  • Few instructions for the 3D printing of the provided housing. Preferably use PETG material for printing the housing and car holder because of its higher temperature resistance, which is advantageous for use in the interior of the car. For reference I...

  • PuriBottle
  • Instructions     from PuriBottle
  • To make the screens work, you have to make the diagram below twice!!And this is the program that matches with them:// on assigne chaque led a une borne de l'arduino //const int A = 2;const int B = 3;const int C = 4;const int D = 5;const int E = 6;const...

  • Wiring Up the OctosonarX2
  • Instructions     from HC-SR04 I2C Octopus "octosonar"
  • The OctosonarX2 is a lot busier than the Octosonar but the connections to the Arduino are exactly the same - so see above for that. The only difference is that the V1 and address solder jumpers are on the front of the board.The OctosonarX2 base address...

  • Custom Enclosure/Body
  • Instructions     from DIY Studio Light/ Light Box
  • Next is the Main Body of this project which holds the Circuit in front and a Fan at the backside. I designed this whole project in Fusion360, the body was made in such a way that we can mount a Generic 12V Mini DC Fan on the backside, it also has two...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday