In the last step, we built a digital camera using the Touch Cam module now in this step we will try another interesting application of the ESP32 Touch Cam module which is the Screenshot Receiver. What a Screenshot Receiver does is that it captures data...
Gnatstats Tiny OLED PC performance monitor & HardwareSerialMonitor Windows Client by Rupert Hirst and Colin Conway This project, assumes you have above average experience with Arduino, the IDE, compatible boards available...
NOTE: none of the following steps require a power supply connected to any of the boards, but in case you want to do so, connect the power supply to the board BEFORE plugging it to your PC and opening the port, as this may cause a short circuit on your...
Requirements Oasis controller is written in Python. Right now the right Python with libraries is required to run Oasis controller. Install the right python and libraries before running the Oasis controller software. Python 3.6.2 PyQT5 (pip3 install PyQt5)pyserial...
To start with any ESP8266 device you have to install the boards into the Arduino IDE, please follow the steps below to be able to compile the board. Please download the Arduino IDE if you do not already have it. 1.- Open the Arduino IDE, select...
After all that work, we are finally ready to compile and program our first application! Let's blink an LED! Various ESP boards have LEDs on different pins. The Feather HUZZAH has one on GPIO0, and another on GPIO2. The SparkFun Thing has one on GPIO5....
Wiring the Joystick and Buttons (Optional Soft Mount)This will be the start of your amazing Raspberry Pi Arcade System!First, you must become familiar with the Raspberry Pi GPIO.This will be where you plug in all the buttons and joysticks.The awesome...
The raspberry pi could be accessed with ssh and files copied with scp (or winscp).Make the following folders:/home/pi/Photos (where the picture files will be saved)/home/pi/polapiOn the last one, put 3 files. The file fbcp (if not executable, use "chmod...
Now setup Arduino IDE and prepare the sketch for upload.Add the Huzzah boards manager to the IDE preferences. http://arduino.esp8266.com/stable/package_esp8266com_index.json Open the boards manager, search for esp and install the esp8266 package (you...
PC control systemDriver installation After connecting Open FURBY USB connector to the master PC controller you must install serial control port driver. Driver are usually installed automatically by Windows; if not install the following driver LINK. URBI...
The RTI system uses an Arduino Mega Board as the system controller, to which you will need to upload various pieces of software for system testing, calibration and control. This section is a quick rundown of what you will need for this, including some...
Many ESP8266 boards come with the Lua interpreter pre-installed. NodeMCU is both the name of the firmware, and also an ESP8266 development board that comes with NodeMCU firmware pre-installed. The firmware can be built with many different modules, which...
The Dragino Kit comes with two Arduino Uno. One mounted with the Lora module and the other mounted with the GPS module along with the LoRa module. For our project, we will be using the one without the GPS module. In this step, we will create an application...
In order to do this you will need an FTDI programmer. This one from Amazon works well - https://amzn.to/3DNSsswTo also make things easier, female to female jumper wires will be needed if you don't already have some. If you don't you...
In this step, you need to calibrate the ESCs. By calibrating here we mean to say that we are going to inform our ESC of the max and min limit between which it is going to be operated. The Calibration of ESCs is necessary to prevent some problems such...