Close

207 Results for "%E3%80%8A %EC%98%88%EC%95%BD%EB%AC%B8%EC%9D%98 OIO%E2%86%978489%E2%86%978306%E3%80%8B%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%A6%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80world%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%EC%82%AC%EC%9D%B4%EC%A6%88%EC%B2%AD%EB%8B%B4%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80promotion %EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80%E2%94%AB %E2%88%AB%EC%84%A0%EB%A6%89%EA%B0%80%EB%9D%BC%EC%98%A4%EC%BC%80decided"

  • The Components
  • Instructions     from SMART MUSIC IN BEDROOM AND BATH WITH RASPBERRY PI
  • The required items for this system may vary, depending on how big you want your multiroom setup to be. Here, we will assume the basic setup using one set of speakers for each room. Based on the intended scope of your setup, you can add or remove as...

  • Camera and LED Panels mounting
  • Instructions     from A DIY Imaging Fluorometer
  • Here is where the fun starts. Find the centre of the heatsink and drill a 16mm hole. This is to accommodate the USB 3 cable to connect the camera and the LEDs wiring. Put the USB cable through the hole and connect it to the camera. Please the camera...

  • Hardware setup
  • Instructions     from Adafruit Ethernet FeatherWing to Ubidots
  • 1. Plug in the Ethernet FeatherWing into the Feather board.  2. Connect one end of the Ethernet cable to the Ethernet FeatherWing and the other to your hub, router, or switch. Step 3. Programming With the following example code, we will publish...

  • DIY Night Vision Scope
  • Instructions     from DIY Night Vision Scope
  • SOURCING A NIGHT VISION TUBEI found this to be the most challenging step to this build. Though there are a fair number listed on Ebay, many had defects (scratches on the screen or portions of the tube burned out). Stay away from these. You will be much...

  • simple native ESP8266 Smartmeter
  • Instructions     from simple native ESP8266 Smartmeter
  • Now that we have the new firmware running we need to configure it.AT+CWMODE=1 will set the device into Station mode.AT+CWLAP list the available Access PointsAT+CWJAP=""," will connect you to your access point, the information is not lost if the device...

  • WRONG PROJECT 2
  • Instructions     from WRONG PROJECT 2
  • Step 3. Cleaning and Dispersion of Chinese Supercritically Extracted AsphaltenesFollow all lab safety procedure.Place 20 grams of dried asphaltenes into a tared flask, record the weight. Add 300-400 mL of acetone to the jar.Place a stick blender into...

  • Monolithic Cotton Supercapacitors
  • Instructions     from Monolithic Cotton Supercapacitors
  • I put the ammonia soaked cotton in a pipe, and beat the heck out of it to fully compress it with a hammer and chisel. You can use any kind of plumbing pipe, just be sure to drill a hole in one end cap so the pressure can be released. I used 2 inch pipe...

  • The Electric Fish Piano
  • Instructions     from The Electric Fish Piano
  • Set up your fish tank:Prepare fish tanks: 40+ gallon - Normal home10 gallon - ExperimentationAir pumpsWater filtersSubmersible heatersPVC pipe (fish like to hide in these)Treat the water: Dechlorinator (I recommend Tetra's AquaSafe plus)pH between 6.0...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday