Close

27106 Results for "《〈 문의 OIO↗5793↗7458 》〉 셔츠룸후기ð νeveningм셔츠룸후기선릉셔츠룸Ξthreshold 강남셔츠룸셔츠룸추천 셔츠룸후기シ셔츠룸후기㎩regular≡"

  • Load the code and test it
  • Instructions     from Trailer tester
  • Download the Arduino code from Github:https://github.com/rfall/trailer-tester.gitor from the Zip file attached to this posting.Open the Trailer_tester.ino file in the Arduino IDE.  This should also open a "task.cpp" and "task.h" file, which are...

  • Introduction
  • Instructions     from DIY Smart Plug and Bulb on Tuya IoT | Adaprox
  • Hey, what's up, Guys! Akarsh here from CETech. In older times, only humans were considered smart, but as time passes, we humans keep making things around us smart as well to ease our lives. One such thing that is trending nowadays is a Smart home. Everyone...

  • Custom Enclosure/Body
  • Instructions     from DIY Studio Light/ Light Box
  • Next is the Main Body of this project which holds the Circuit in front and a Fan at the backside. I designed this whole project in Fusion360, the body was made in such a way that we can mount a Generic 12V Mini DC Fan on the backside, it also has two...

  • Setup
  • Instructions     from Watchdog - Simple WDG Timer
  • If you have a dog in your home. You need to feed that dog at a regular interval. if you can’t feed one day, it will bite you! And likewise, this is the working logic behind the watchdog timer. In our example, we created 2 tasks that contain some loop...

  • Solving Challenges
  • Instructions     from Binary Wrist Watch
  • The watch has 4x4 minus three LEDs arranged in a multiplexed matrix. Where one column corresponds to one digit in digital time. The time is shown in binary coded decimal and one of digit is represented as with a maximum of four bits. It both looks exceptionally...

  • Assemble your Printer
  • Instructions     from The Trash Printer - Version 3
  • You can check out the interactive model for the Trash Printer on the SketchUp 3D viewer, or download it from the SketchUp 3D warehouse. You can use this model as a reference to see how all the parts go together, and you can also use it to modify...

  • Floating, Bamboo Makerspace
  • Instructions     from Floating, Bamboo Makerspace
  • Solar Power InfrastructureAs I mentioned earlier, when you build the roof, you need to attach the solar panel. We sliced bamboo in half to make a bamboo frame that would hold the panel securely in place.A basic solar power system consists of the following:PanelChargerBatteryInverterRoute...

  • Linear vs Logarithmic Scaling
  • Instructions     from Audio VU Meters & Raspberry Pi
  • Now we are practically done, but if you have inspected my code carefully, you could see that I am not using a linear scale to output the VU Meter value. I was using a linear scale at the beginning, but noticed that it was very hard to read low system...

  • Part 5: Programming
  • Instructions     from High Efficiency MPPT Solar Charger
  • First of all, the user interface doesn't need any programming.  For the main board you need to program it with the bootloader, not the SolarCharger firmware. For that, you will need some sort of programmer that allows you to connect your...

  • Creating the Circuit
  • Instructions     from Binary Wrist Watch
  • Okay so we've talked a lot about parts of the circuit and the reason behind the components. Now let's put it all together in a complete circuit! The PCB was made round to make a callback to regular watches. A standard watch body is usually 42mm with...

  • Buying a guitar or building a faux one

  • Instructions     from Guitars into speakers
  • WARNING: ALL INSTRUCTIONS ARE A WORK IN PROGRESS AND ARE LIABLE TO CHANGE ON A REGULAR BASIS TILL THE PROJECT IS COMPLETE!! Buying vs building [Discussion of pros and cons] The main advantage of buying a ready-made guitar is the significant reduction...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday