1804 Results for "Q%20%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%20CDDC7_C%D0%9EM%20%E2%97%86%EB%B3%B4%EB%84%88%EC%8A%A4%EB%B2%88%ED%98%B8%20B77%E2%97%86%EC%88%98%EC%9B%90%EC%9E%A5%EC%95%88%20%ED%94%84%EB%A1%9C%ED%86%A0%20%EA%B5%AC%EB%A7%A4%E0%B9%8F%ED%86%A0%ED%86%A0%ED%95%AB%ED%94%BD%E2%8F%AC%EC%98%A8%EB%9D%BC%EC%9D%B8%ED%99%A9%EA%B8%88%EC%84%B1%E0%BC%88FX%EB%A7%A4%EB%A7%A4%E2%8B%8D%EC%95%88%EC%82%B0%EB%B8%94%EB%9E%99%EC%9E%AD%EC%95%A0%EC%9A%A9%20thorough/"

Step 3: Let's Connect Everything
Instructions from Smart Bluetooth Speaker with Spectrum Analyzer
The Bluetooth module is the F6188 module which is good and works very well. You might need to add a heatsink on top of the module as it heats up sometimes. The speakers are connected to PAM 8403 module and input to the module is given by the both...

Fan controller for Re:Load Pro
Instructions from Fan controller for Re:Load Pro
Make you the PCB and get the components and any standard 60mm 4-wire fan will probably do the job. I used a JMC "6015-12HB APW" that I had lying around. The exact the same fan is readily available on eBay.I used eagle to design my PCB, and the files...

Adding video and sound cards to RC2014 aka RC2014+TMS+AY
Instructions from MSX on RC2014
In this step we will add the video module and optionally the sound module at that point you'll be able to run demos and games written specifically for this setup. Unless you want to run MSX BASIC or MSX games then you may want to stop there. RC2014 +...

Arduino Game Console - the BlueOkiris Gameduino
Instructions from Arduino Game Console - the BlueOkiris Gameduino
Take the analog stick and solder the appropriate wires to it. Place ground to ground, 5v to 5v, x to A4, and y to A5. Again do not use male ends to the arduino.

Prerequisites
Instructions from Autonomous Research Laboratories
Order the required parts [Self-contained Digikey Order] (60.80 USD + shipping as of 2022-10-20)The sculpting wire is also available at Amazon. Approximately 3' is required.The purpose of the wall adapter is so that, after initial setup, the SDL-Demo...

Connect your device with miniDenko
Instructions from miniDenko
WIP Scan and connect to the AP named "miniDenko-xxxxx"(here xxxxx is a unique chip ID)Open http://192.168.1.5/ in a browser (Chrome recommended) Here you can edit & submit new messages ( Try to tap the "Add" button) miniDenko internally has 3 "slots"...

Laser-cut, Mail-able Christmas Tree
Instructions from Laser-cut, Mail-able Christmas Tree
Finally, add any message you would like, and put the pack into a card-backed A5 envelope and post it!All the ones I posted weighed 104 g, combined with the thickness, this puts them in the 250 g bracket for Royal Mail's "Large Letter" - costing £1.26...

1. System Dynamics of the Ball Balancing Platform
Instructions from Adventures in state-space control, Arduino edition
Fortunately the dynamics of the table are not too complicated. Let the state, x, of the table include 2 variables, position and velocity, x and v. Given the relationship dx/dt = v, the state matrix equation is: The only way to control the position...

Korg DW-8000 MIDI Enhancer
Instructions from Korg DW-8000 MIDI Enhancer
If all went well, the synth should now respond to CC messages received on the MIDI IN socket, and the display will show the values changing.Look in the source to see which CCs are mapped to which parameters. I've tried to chose sensible values, but YMMV,...

Wine not shed some light?
Instructions from Wine not shed some light?
6. ASSEMBLE LAMP HOLDERAssemble the Lamp holder assembly using:1x Female reducer1x 15mm Straight NippleThe lamp holder fitted amazingly into the end of the nipple. The insides of the nipples were dremel'ed out so the edges would not cut the wires.Space...

Wire up the LCD
Instructions from Big Fun with BigNums2x2!
I happened to have an unused Adafruit RGB backlight positive LCD 16x2 handy, so I soldered on the headers, then followed their wiring guide to ensure everything was working. The particular LCD that I'm using is RGB-backlit, but to keep the project somewhat...

Raspberry Pi Zero Smart Glass
Instructions from Raspberry Pi Zero Smart Glass
Place the camera in the eyepiece.

Desktop Injection Moulding
Instructions from 3D Printing and Moulding with Recycled Facemasks
The injection moulding process involves injecting a volume of molten material into a mould over a controlled period of time. Naturally, this requires the use of a machine designed for such a task. Pictured below is the C R Clarke 25 mechanical desktop...

Sugarcube - a tactile music controller
Instructions from Sugarcube - a tactile music controller
I attached a 2 axis gyroscope and 3 axis accelerometer onto this project so that I could add some interesting control to the device. The 5 degrees of freedom board from Sparkfun outputs data from its gyroscope and accelerometer as analog voltages. I...

Raspberry Pi Zero Smart Glass
Instructions from Raspberry Pi Zero Smart Glass
Step 4: Pry out the video glasses from the seems by using a plastic tool or a flat head.

|<
<
6
7
8
9
10
>
>|