Close

1644 Results for "∇ 최저가 Ò1Ò《⑤⑦93》74⑸⑻ ∇런닝래빗가격β런닝래빗주대result런닝레빗가라오케주대런닝래빗주대런닝레빗가라오케주대voyage 런닝래빗가라오케ㅅＧ런닝레빗가라오케주대indies"

  • Finishing Touches
  • Log     from Retro Robot Restomod
  • Scott and I got together on Saturday to hammer out the final details and give Scott a chance to the Bluetooth module working properly. Armed with a scope this time he made much better progress than I had. Having the hardware also meant that he could...

  • Radio Controller App
  • Log     from Retro Robot Restomod
  • Seeing as how we don't have any CPU cycles left in the arduino for a neural network, we figured we'd just have to make a remote control app, and leverage the human operator's biological neural network.At the moment it's very bare-bones as you can see....

  • v2 - automount and play video from USB
  • Log     from RPiLooper
  • The first version played videos directly from the SD card, which worked as intended. However, it was difficult to change the video that was playing, and also made the replication process a little difficult. We need a good 10-12 of these running, each...

  • 0.9?
  • Log     from B(h)ackpack AP
  • This has been back-burner'd for a while. Work and school come first and all. But progress has been made very recently. Some time ago, I gave up on the TP Link pocket router and went with a Raspberry Pi 2, inspired by other projects on here and around...

  • Adding the brains and... a problem
  • Log     from 3D Printer
  • Step 2: Motion. Time for a RAMPS board! After a lot of hunting around I decided on the "Ramps 1.4 Mini Set" from gadgets3d.com. For only $90 it came with RAMPS 1.4 board, 5x G3D stepper drivers, cooling fan, SD card reader, 2x thermistors, and wiring...

  • Troubled by the OS.
  • Log     from ArcReactorX
  • Woah! It took me a while to figure out how to get the video from My Nokia Lumia device to Ubuntu after my Windows Laptop crashed. I tried a couple of ways like Bluetooth, Wifi,SD Card etc. Ubuntu (12.04LTS 64bit) does understand MTP natively. So, there...

  • Beginning
  • Log     from WIP MP3
  • Today I received my dev board in the mail. As stated in the project description its a VLSI VS1005 dev board that has a colour touchscreen, USB in and out, headphones and digital in/out, Li-On charging, RTC, Ethernet, an SD card reader and a few buttons...

  • Day 1
  • Log     from Portable Raspberry Pi Wallet
  • DISCLAIMER: I will be following the steps from this guide (https://learn.adafruit.com/diy-wifi-raspberry-pi-touch-cam/) for the early phases of this project.For the first day, I just wanted to get the Raspberry Pi up and running with the OS. To...

  • New motor driver tested
  • Log     from Jimmy the mouse bot
  • I soldered a new motor driver with an IRL 510 mosfet. I did this because the transistors I used got too hot and burned out. The driver for the left motor works with the old motor. So I can now build the driver for the right motor in the same way. The...

  • Load firmware from SD card
  • Log     from Jimmy the mouse bot
  • I'm using now a nice Tachyon feature, it's the ?AUTOLOAD command. It checks the SD card for an updated FIRMWARE.ROM file. If it finds one then the new firmware is loaded into the EEPROM and it reboots then.To use this I had to first program the EEPROM...

  • Preview of v4
  • Log     from D-DAQ
  • Here is where I'm currently at with version 4 of the prototype:---------- more ----------Thick border is the flat top area on the case. The 4 keepout areas are portioned for grommets for helping shock absorption to the PCB directly. To avoid a large...

  • Comparing D-DAQ's Performance Characteristics
  • Log     from D-DAQ
  • I've talked a bit about the performance I want, need, and expect to have out of D-DAQ. I've mentioned a long lost digital gauge with no known good video footage for people to have a benchmark of. There is also a "high end" gauge setup a friend of mine...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday