4 pounds 5 ounces, it is light considering everything that is on here! In retrospect in the future I would do the prefiltering and the voltage dependant resistors and capacitors on the ground before the tether. It is not as effective because over the...
All the stl files will be drop after the French Eurobot cup, the 1st June 2021. here you can see all the part involves, Everything has been design for an easy build and easy printed without support needed. Only 4 * M3 screw are needed for the frame ! 🔩It...
Construct frame parts, better keyboard and print everything. Print keyboard sticker and laminate them. Now i will make some testing and optimise the software. I think Phosh is a great desktop for this kind of PC
Using a canvas in Fusion 360, I drew up the start of the frame for the radio. I printed a sample last night, and I'm not confident I can fit everything in it without making it super thick... I might have to use some smaller lithium cells as...
Figuring out how to get the various chassis layers to stay together was a bit of a puzzle; I wanted to use tiny socket head cap screws to allow full disassembly, but I also didn't want to drill holes through the arms. Trouble is, the mounting holes on...
I have been asked to show the full stack of ELLO 2M together. With my limited resources at home it is a bit difficult, but here it is. I hope it is clear enough :-)These pictures can demonstrate how everything stack together. They also show clearly how...
IntroOne might be wondering, how the switch module can fit into a standard switch plate. In our house we are using a model which provide a mounting frame for it. Therefore it's easy to mount everything into this frame. The pictures shows how I have it...
After cleaned up the 3D printing parts and received the online ordered components, it came to the time of putting everything together to see how things fit or not.The Bluefruit EZ-Key is really tight-fit to the frame. I have to trim a little to be able...
Decided on 558mm (22in) for my rod lengths simply because that will make the whole thing fit on the 24x24in bit of MDF I have for the base (and it will fit through doors fully assembled). Cut the rods with a saw and cleaned up the ends so they are...
I want to have the CPU prominently visible in the design so I used the technique with having high value resistors for mechanical support of the parts.To get everything neatly aligned and even I made a template (in Eagle) and printed it to aid me during...
It might not look like much, but I got everything installed and set up and figured out enough to get this development board up and running 😁Today, we blink some lights. Tomorrow, we blink the world! or somethingHere's an example of the glitchy...
There's actually not much to be said about the LCD frame. In fact, now that I look back through the hundreds of pictures I took during the construction of the reComputer 1000, I realize it doesn't seem like I ever took a clear shot of the thing in isolation....
We got far enough wiring (and re-wiring) the thermoforming machine to perform an integration test of the low-amperage parts of the machine. This covers almost everything except the heating element. On the previous test of the compressed air subsystem,...
Here's an update on the progress I've made building an enclosure for the device: The enclosure is made out of a couple oatmeal containers attached to a frame of foam board. The front is a piece of mat board (roughly the same thickness as the...
04.23.2014 (Kittan)The frame has been finished and bolted to a foot plank. All screens are mounted in final position, all cables (including serial and USB lines for touch interfaces) are run and secured. The whole thing has been shifted out of workspace...