3504 Results for "《 예약문의 OIO≡⑧④89≡83O⑥》레깅스룸견적よ레깅스룸ago레깅스룸メ강남레깅스룸eighty 선릉레깅스룸κ선릉레깅스⒲레깅스룸メｃ선릉레깅스룸literary"

Printing my own parts
Log from Minimal Pico Vertical Plotter
The project heavily depended on Ben's original article and 3D printed parts including the motor holders and the pen gondola. It was never completely clear how the electronics were attached to the board in the original design. I've now merged some other...

Fabricating, filling, sanding...
Log from Vintage Adamcraft Model RAF Seaplane Tender
The new parts have arrived, including prop and prop shaft, rudder, motor, coupling, etc. Had to fabricate a 'p frame' from scratch out of 8mm brass strip. That was fun, but it came out ok - first trial fit of all the bits: Lots of effort spent on parts...

Well It almost worked
Log from 3D Printed Chiming Clock
I printed a copy of the Escape Wheel and the Graham Yoke to test how well it would work. Well it mostly worked, but would occasionally hang up, and was quite rough in spots. So I decided to go back to basics and redesign both the Yoke and the Escape...

Teamwork credits
Log from Hack A Sketch
Thank you... ...Hackaday and Supply Frame teams for making Superconference 2023 and the badge happen! ...SoftEgg for the early CAD model of the badge to work from! ...Simen, Elliot, Tom, Daniel for providing help with code mods! ...attendees who...

Assembly
Log from LED frame for the 2023 Supercon badge
This is my badge hack for the 2023 Supercon badge. Before the con, I designed a LED frame in Fusion360 for resin printing based on the published Gerber-Files. This frame has space for 280 WS2812B LEDs in 1010 package (1x1mm). There are cut outs...

Section #3 & Swing Arm #3
Log from Apollo Saturn V and LUT
I have started section #3, levels 120 through 180. The structure is printing up well, no need for modifications so far. As it turns out the levels 140, 160 and 180 all have the same floor beams and legs. I didn't plan it that way, its just the way it...

Section #7
Log from Apollo Saturn V and LUT
Motor Housing: The motor housing is complete except for the stairs. In the first picture you can see the floor beams with the grating cut to shape. I didn't make a specific grating. Just print up the standard grating and then cut out the hole shown....

Colby Crane
Log from Apollo Saturn V and LUT
The Colby crane is the final, crowning achievement of the LUT. The crane is going to be automated in that it will rotate and the hook will raise/lower. Notice that I intended to use the crane model by CristineZ as is but the more I dug...

3D design and solar power
Log from E-Ink dashboard with React serverless backend
Started designing the frame/stand for the display yesterday. I haven't used CAD software in years so I'm following a series of youtube tutorials (https://www.youtube.com/playlist?list=PLrZ2zKOtC_-C4rWfapgngoe9o2-ng8ZBr) to get myself back up to speed....

3D printed frames
Log from E-Ink dashboard with React serverless backend
I designed a couple of frames and stands for the weather station. This was my first time 3D printing and it was really fun to learn and iterate, although the wonder wore off somewhere around the 5th prototype.I've uploaded STLs and the fusion360 files...

Teardown Report: Anatomy of an Infrared Remote Control
Log from Your Friendly Teardown Robot
Another example - I did not even provide any informatition about the device apart from the photos. Cute curious how many details it picked up, but not all information was derived the images, it seems. (there is no crystal oscillator and it did not comment...

[E3][R] Transparent HMD Options on AliExpress
Log from Itinervate [gd0151]
Realising that I had the simple yet inescapable choice to finally look into a strong and stable life-management system or chaos continuum, I started searching around on Friday 24th Nov when I said to myself "I feel that if I set the budget for the HMD...

[M] First concept design
Log from Itinervate [gd0151]
I want a design that looked like this: but more importantly, I just wanted something that I could use as the cover image for this project. Here is my modelling process: This is the basic design of the HMD module. I modelled the hat by non-uniformly...

Completion of the Project KC 6H AKA "Thockyy"
Log from Keychron K3 Pro Project KC 6H "Thockyy"
Following extensive use of my keyboard, I recognized the necessity for a palm rest to enhance my setup. However, I encountered a significant issue: the palm rest failed to securely attach to the keyboard. This became particularly problematic during cleaning...

CHESSmate Lite
Log from Commodore CHESSmate Reproduction
I guess I'm getting a little antsy waiting for the daughterboard PCB to arrive (it has been shipped). To pass the time I thought I would try out an idea I had for a stripped down version of CHESSmate. My goal of course is to make a full blown reproduction...

|<
<
230
231
232
233
234
>
>|