Close

4829 Results for "『 모든문의 OIO=5793=7458 』 선릉셔츠룸ㆌ ∩anyway≒강남셔츠룸강남셔츠룸∧warmly 강남셔츠룸셔츠룸사이즈 셔츠룸터치の셔츠룸테란мhearingキ"

  • Design Considerations
  • Log     from Open Indirect Ophthalmoscope
  • Earlier version of the device was reconsidered in terms of following aspects:• Accommodating for different refractive errors • Aesthetics • Ergonomics • Weight distribution OIO ASSEMBLY EXPLODED ASSEMBLY1. ACCOMMODATING FOR DIFFERENT REFRACTIVE ERRORS...

  • Box coming together
  • Log     from UV Exposure & Backlight Box
  • Bit of an update... been putting it together. Still a fair bit to do but its wired up and most of the parts glued in. Still need to cut the perspex a to fit the frame... Anyway heres a vid

  • Schematic!
  • Log     from System K8
  • Purchasing samples from Gowin turned out a long journey. Initially they were supposed to be here by Oct 10, chasing them now and their current status is still unknown. All other parts in the system have been sitting in a box and waiting for that most...

  • Works Great!
  • Log     from Pocket-Sized Imsai-Style Z80 Board
  • The board seems to be working perfectly! Building it up took me about 8 hours (I'm still relatively new to SMD work), and other than the few issues mentioned in the prior log, it all worked as expected.I found that solder paste + hot air isn't as precise...

  • Bad news everyone !
  • Log     from ToxPhone
  • So, I started a new job and since I'm buying a new car, I got less and less time to spend on the ToxPhone. Since the Raspberry Pi Zero contest is coming to an end, I decided that I could at least throw a finished product with an unfinished software......

  • the black box
  • Log     from Altoids-point
  • For those wanting a more Stealthy and less Altoids look...  (I know right?.....Anyway here you go..) All the same stuff, just in a shiny black box.  no external plugs, switches or lights showing. easy pop On/Off lid for access the laptop...

  • Bringing project back to life
  • Log     from LED Oscilloscope Mk. II
  • Conway's Game of Life, actually... I dug the display board and the horizontal and vertical driver boards out of a box of junk to revive this long-dormant project.  I also realized I never documented the driver boards - I'll have to do that next....

  • Touchscreen installed!
  • Log     from Talker
  • I settled on using the Wave Share Spot Pear 3.5" resistive touchscreen.It does not work out of the box because the default setting on a raspberry pi is to use the HDMI port as the video out. The users manual for the touchscreen has instructions, but...

  • On the Road
  • Log     from Dodo: 6502 Game System
  • This evening I took Dodo out for the first time. Earlier today I just happened to notice that Hackaday was having a 'show and tell' meetup at a local pub not too far from where I live. I have been wanting to go to one of these meetups but they have always...

  • Continuation of the Project
  • Log     from Mailbox Sensor
  • After a bit of a hiatus, I picked this project back up and have a working prototype. It has been working for about a month and a half, and it has worked amazingly well. The VCNL4200 proximity sensor has worked nearly flawlessly, missing only 1 small...

  • Up and Away
  • Log     from Shop Reorganization
  • I have been going around in my head trying to figure out what the best way is to hang wood on the wall.  I could cut some sort of L shaped braces (or E shaped) from plywood.  I could build a box out of 1x2's that the wood could slot into.  I...

  • power specification
  • Log     from upgradable electronic children's toy
  • I want to get on with the box design, but I think until I finalise how the power handling stuff is going to happen I can't. I've been over a couple of Raspi power solutions:http://www.pi-supply.com/product/pi-supply-raspberry-pi-power-switch/http://pi.gate.ac.uk/pages/mopi.htmlbut...

  • Mechanical Side Finished
  • Log     from Bicycle Regenerative Braking System
  • Finally the mechanical stuff has been finished (or so I hope). The dynamo is now a cordless-drill motor/gear-box instead of the original motor from a printer. There is also a choice of high or low gearing, so I can use it on low when going down a hill...
Going up?

About Us Contact Hackaday.io Give Feedback Terms of Use Privacy Policy Hackaday API

© 2024 Hackaday