This is an overview of the layout in which KGE works. Get User String (Round 0)Split String Into PairsIf Not Enough Then Add Specially Made Character Which Is Deleted During DecryptionUse Byte SubstitutionSwitch User Strings To IDs and Find Replacement...
Debugging Need to get this project working. One problem is that the Nano does not have enough pins. So I have used a Meduino (a Mega2560 Pro Mini). Here is the schematic: Here is the PCB: The ports (P1 & P2) match the TTA8 bus. A problem with the Meduino...
As you can see airodump-ng picked up the WiFi of the drone and also that it is running on channel 2. Next I recorded some packages. sudo airodump-ng -w JJRC_out -c 2 -bssid 10:A4:BE:2E:77:B5 wlan0mon While recording I simply used all the functions the...
In this project, instead of using a standard embedded processor and programming it to execute 3 tasks at hand (parsing HEX character stream, generating HEX character stream, and writing character stream to video RAM driving VGA), I created 3 independent...
Remapping the KeyboardGiven most of the work is done with the "basic shift logic" how hard could it be?The basic shift logic:Well much harder than expected, here is the schematic:Now many will recognise this as a PLA (Programmable Logic Array).Designing...
1440x1440px resolution at 125% scalingWhat the screen would look like on Tetent (but sharper). This already makes me think back to my Windows Vista on PSP days, but I'm mainly imagining the future present of quietly chilling in bed while trimming down...
I must confess I haven't spent much time looking at NTC curves before. My prior knowledge was that they are somewhat ill-defined and can only deliver reliable measurements when calibrated individually. source: https://support.belimo.us/Documentation/Standards-Compliance/957165601/What-is-the-difference-between-NTC-10K-Type-2-and-Type-3-sensors.htm...
Development on the V9958 board continues apace, and after a false start due to a silly mistake in the first revision things are back on-track with a revision 1 prototype. The design is now validated and working really well. So far it's baby-steps in...
This is a big question, where to start with the ESP8266. There is the official SDK path, for the brave. There is the Arduino, Espruino... Well, I tried NodeMCU. Starting with this page https://nodemcu.readthedocs.io/en/master/, there is a lot explained...
I recovered the project file from my drive and made some changes to it. The question is, which wire goes where? I won't know for sure until the dummy plug arrives, but the AUX line is definitely used for this purpose. I even created an EDID data for...
At the OHSummit, I was joined by Amber Cunningham, community manager of Tindie. While Hackaday and Tindie have the same overlords ruling over them, we can't really have Amber going around with a Hackaday logo on her badge, can we?...So I spent 15 minutes...
The first step in reverse-engineering any radio protocol is to listen to it on the air. The advent of software-defined radio makes this much, much, easier than before. For this project I've used a nuand bladeRF board and the GNURadio software stack,...
When I set about this project the first thing I wanted to work out was what LED I was going to use, as this would drive the requirements of everything else in the project, driver, lens, heatsinking, etc. Due to personal preference I decided that I wanted...
Using a counter for the ISRI received a suggestion to use a counter and trip method for the Interrupt Service Routine (ISR). While is was not keen as the method (Direct Digital Synthesis) is pretty standard and gives the best long term accuracy. But...
Any enclosure needs to be easy to access yet provide enough space to get all of our cables in and out without being too big. A tough challenge!---------- more ----------Once our technology solution is chosen, we have to mount it, cable it, make it all...