3109 Results for "%E3%80%8A%EC%98%88%EC%95%BD%EB%B2%88%ED%98%B8OIOX8489X83O6%E3%80%8B3hours%EB%A0%88%EA%B9%85%EC%8A%A4%E3%85%8A%E3%8F%9Cappetite3hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9%D1%82%EA%B0%95%EB%82%A83hours3hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9%E2%93%A2%E3%82%B73hoursnamed 3hours%EB%A0%88%EA%B9%85%EC%8A%A4%EA%B0%80%EA%B2%A9%E3%8E%A43hours%E3%8E%8D%D0%B7resolution"

Gathering information
Log from WD2002SJ Bench Power Supply
Tonight I gathered some reference/research material for this project. Fortunately, several others have done some really great work with this module, so here's credit to them: LTC3780 DatasheetBeyond Logic blog postTemplaro blog postGreat Scott videoJulien...

Command And Control
Log from Reverse-Engineering the milight on-air protocol
When entering a short test sequence on my remote this is what my receiver displays (a dot means an exact repetition of the previous packet):All on: 07 B0 F2 EA 35 90 01 B9 AC F9 .......................... 07 B0 F2 EA 35 90 00 B9 74 E0 .. Color red: 07...

Access SD Cards from the PSoC
Log from 3-Chip Z80 Design
I'm going to create a stand-alone PSoC project to use the PSoC to read SD cards. I'm going to start with the hardware defines for this project (which should leave the Z80 hardware pins unmolested) and just not download code. For the software piece, I...

ETTL protocol with the EOS RP & 580 EX II
Log from Wireless ETTL flash conversion
The STM32 board was just a hair bigger than the PIC, but the biggest pieces are still the power switch, channel button, & battery. The plan is just to print an L enclosure which scotch tapes around the hot shoe & sticks up. The antenna will...

Paper Model now Steps. Stepping algorithm optimized. 11 bytes saved.
Log from Mystery 6502 program for the Kim Uno #1kBChallenge
I was looking for a way to make the Excel Paper Model for the Z30 calculate the stepping points so it would be a complete model of the machine. The example shown below is for a rotor with a Ring Setting of 4, the 1 mark on the ring is set to the 4 position...

In The Radio Domain
Log from Reverse-Engineering the milight on-air protocol
The first step in reverse-engineering any radio protocol is to listen to it on the air. The advent of software-defined radio makes this much, much, easier than before. For this project I've used a nuand bladeRF board and the GNURadio software stack,...

Comm protocol between camera and drone controller
Log from Reverse Engineering a ProMark VR Toy Drone
Initially I thought the data stream from the camera board to the quadcopter controller was PPM. This signal is only active when the app is running and the on-screen controls are brought up. The quadcopter has to be power-cycled in order to be controlled...

New Boat, New Autopilot - using an old laptop mainboard!
Log from OpenCPN Chart Plotter /w Autopilot and Waypoints
For quite some time I have been thinking about the possibility to using a laptop to run all the heavy OpenPlotter and OpenCPN stuff instead of using a Raspberry Pi. The performance of the RPi is... well it's usable but it's not a pleasant user experience....

We get signal
Log from Reverse-Engineering a low-cost USB CO₂ monitor
Indeed, immediately after running the Windows software in a VM with the device connected I was getting a live data log of the CO₂ concentration! This screenshot shows me breathing into the vicinity of the sensor:Ok, time to disconnect the device from...

Plasma Effect for TMS9918
Log from Game Boards for RC2014
Plascii Petsma by Cruzer/Camelot has one of the nicest looking plasma effects I've seen for the C64. Since he included the source code, I was able to port it to the Z80 and TMS9918. On top of the features in the original C64 version, I have...

We’ll be on Maker Faire Kyiv this weekend!
Log from uECG - small open source wireless ECG sensor
Quite symbolically, this Saturday, on March 2, Kyiv will host the first Maker Faire Kyiv in a long time! The last one was in 2018.Where, in addition to uECG and uMyo, we’ll present our first project in collaboration with TURFPTAx The device working...

We’ll be on Maker Faire Kyiv this weekend!
Log from uMyo - wearable EMG sensor with wet/dry electrodes
Quite symbolically, this Saturday, on March 2, Kyiv will host the first Maker Faire Kyiv in a long time! The last one was in 2018. Where, in addition to uECG and uMyo, we’ll present our first project in collaboration with TURFPTAx The device working...

All boards received
Log from NEDONAND homebrew computer
The rest of the boards just came:I think I will connect them together through wire-wrapped "motherboard" (lets call it "NEDONAND-10" ; )All of these NEDONAND components could be tested one by one using PIC microcontroller (connected to PC through RS-232)...

Interfacing ternary and binary components
Log from Homebrew ternary computer
Ok, now it is kind of proven that binary CPLD (or FPGA) may implement ternary logic, but how we can integrate it with "true" ternary components, especially when CPLD is 3.3V and TRIMUXes are -5V and +5V? Answer is DG403 chips may do the job: Because...

Multi-boot Multicomp (Part 2)
Log from 3-Chip Z80 Design
I've got the BIOS loading for Multi-boot Multicomp. It boots up to the Multi-boot prompt. > Available Commands: :ccxxxxiibbbbbb Load Intel-Hex file record Rxxxx Run from address xxxx Sddd System boot Iddd Init: Format directory Pddd[,xxxx] PutSys: write...

1
2
3
4
5
>
>|