24533 Results for "S 토토추천업체 CDDC7.COM ♪보너스코드 B77♪토토피지컬ྪ피망포커쿠폰☸카지노직업⋔실시간tv중계ڢ토토추천업체사랑 dissimilarity/"

Ricoh Theta S 360 Streaming
Log from Metaverse Lab
Thinking Outside the Bubble Live-Streaming from a $350 360 camera into Virtual Reality The Ricoh Theta S has achieved much praise within the VR community as being an easily affordable 360 camera that does all the things. The camera has 14MP resolution...

Ammeter
Log from Precision current generator
For the current display, I have hacked a JT-033A : It's a decade-old device that was laying unused in my multimeters bin, because its probes were damaged.The autorange does not work in the very low currents :-( but it's sufficient for the...

Finding the COM Lines on 10th Nov. 2018
Log from Scale Over IP using an AEG PW 5644 FA
After a longer break we gave it another try and soldered the rainbow cable to the display of another scale. This time we were very careful and did only use as much solder as was really needed. After reassembling the scale the display still worked! Also...

Back to the roots ...
Log from XtsTinyBasicPlus
The orginal goal of this project was to make a smarter & powerfull(er) serial com to my Canon X-07 (by adding support to UARTs & uSDCards).It 's now happening ...And I hope some other ideas will come soon....

Current Measurement and finding 5 V on the Nano33 IoT
Log from MicroGrid Connection Unit
The current prototype of the MicroGrid Connection Unit uses a regular 5V Arduino Nano, and an ACS712 current sensor to measure the current flow to or from the grid. Unfortunately, the Nano33 IoT is running at 3.3V instead of 5V, but the ACS712 doesn't...

feels a bit empty, for reasons
Log from FAME BOY
There was an unofficial statement of "bonus points for blog posts" on the element14 community page for the "Hack Like Heck" contest, so that's why I'm posting my logs there and I'm too lazy to copy them over here. Wouldn't feel right either, so I admit...

Creating a BIOS extension
Log from PCjrCart
So cartridges in PCjr are actually PC BIOS extensions with 055h 0AAh in the beginning and this is how they checked on boot: with step 2K it's looking for 0x55 0xAA signature and then check CRC: And this piece shows how BIOS determines which algorithm...

"OTTO BOT IS BOB’S GRANDSON"
Log from Otto DIY
That was the tittle of the great post made by Elliot Williams."The Otto DIY robot has just taken first place in the coveted role as “best robot to 3D print for your (inner) child”. It’s cute, it dances, it doesn’t cost too much, it’s completely...

Test device MAXIM MAX11300 Arduino Shield
Log from Tektronix MSO2024B Oscilloscope Review
My device to test all the scope functions is an Arduino shield with a MAXIM MAX11300 20-port mixed signal IC, which offers DAC, ADC, analog switches and GPIO port functionality and can be programmed through SPI interface (the board is hosted on Hackaday.io...

Pushing the limits
Log from Tektronix MSO2024B Oscilloscope Review
I am in the lucky position to work on a board (at my day job) that uses a 200MHz LVDS clock signal. What would be better than measuring this clock with the MSO2024B and a DSO7245 (2.5GHz bandwidth and up to 40GS/s woohoo!) to compare the waveform captures....

Fixing-Together and Refining the Enclosure
Log from Vintage Toy Synthesiser
(Original post date: 03/04/16)In order to undertake this project I had to completely take-apart the toy piano, unfortunately slightly damaging it in the process due to the way it was originally connected together. As all the electronics for the project...

Design
Log from MicroGrid Connection Unit
In the first post, I shared an overview of the different options of the Connection Unit I'm looking to build over time. For now, I want to start with the simplest version, which is supposed to connect a solar system to a grid of (roughly) similar voltage,...

The End Result
Log from Vintage Toy Synthesiser
(Original post date: 09/04/16)So this is my 17th and final log for my music tech design challenge project, and for it I have created three new videos talking about and demoing the end result of the project: A specification overview video, outlining all...

3D printed helmet
Log from Robô da Alegria ("Joy Robot")
The head of the robot was designed in Fusion 360. It's composed of 6 parts, which were printed in white PLA with 0.2mm resolution. Total printing time: 14 hours.A cabeça do robô foi projetada usando o Fusion 360. Ela é composta de 6 partes,...

Boards
Log from STM32F4inputs
The PCBs have finally arrived and after a few trial runs/failures with 0603, there's this: Opamps are still not fitted, and there was an error in the circuit around the switches.The PSU-sections work, and when the Dfu bootloader runs the MCU is identified...

1
2
3
4
5
>
>|